Dallab DP900 hard reset

Press RESET button to restart your device.


Dallab DP900 reset

Dallab DP900 reset

It is very important to keep your battery charged. If the DP900 runs completely out of power, any new programs you have installed as well as all personal data on it will be lost. When battery power has reached a critically low point, your DP900 shut down and you will no longer be able to operate it without plugging it into a power socket via the Y-cable or cradle. A safety feature designed into the DP900 will maintain data on the device for roughly 72 hours after power has reached this threshold level. When this occurs, you must recharge your DP900 within 72 hours to preserve user data and any programs other than those provided as defaults.

Dallab DX8 hard reset

How do I perform a soft reset and a hard reset?

For soft-reset, use the stylus to reach the reset button found at the device's left side hole.

Hard reset Dallab DX8

To perform a hard-reset, keep the stylus on the reset button and press the power on/off button at the same time. Then follow the screen instruction for the hard-reset.
*Note: The data in the SRAM will be lost after hardware reset.

Dallab DX8i hard reset

How do I perform a soft reset and a hard reset?

For soft-reset, use the stylus to reach the reset button found at the device's left side hole.
To perform a hard-reset, keep the stylus on the reset button and press the power on/off button at the same time. Then follow the screen instruction for the hard-reset.
*Note: The data in the SRAM will be lost after hardware reset.

Dell streak mini 5 hard reset

Dell mini 5 Streak hard reset

1. Press and hold the power button and then touch the Power off option on the screen to turn off the device.
2. Simultaneously press and hold the volume up button and volume down button .
3. Without releasing the volume buttons, press and hold the power button, until the device turns on the configuration screen.
4. Press the volume buttons to move the highlight bar on the screen to the Factory reset option.
5. Press the Camera button to start the reset process.
6. Wait for the device to reboot.

Dell Venue Pro hard reset

Dell Venue Pro hard reset

To reset your phone to the default state

CAUTION: The following steps will restore your phone to the default
state and erase all data and downloaded applications stored on it.
Ensure that you back up all the required data before you reset the
phone.

1 Touch Start → applications → Settings.
2 Under system, touch about.
3 Touch the reset your phone button.

Dell Venue hard reset

Dell Venue hard reset

To reset your Dell Venue smartphone to the default state

CAUTION: The following steps will restore your smartphone to the
default state and erase all data and downloaded applications stored on
it. Ensure that you back up all the required data before you reset the
smartphone.
1 Press and hold the Power button and then touch the Power off
option→ OK on the screen to turn off the smartphone.
2 Simultaneously press and hold the volume up and down buttons.
3 Without releasing the volume buttons, press and hold the Power
button, until the smartphone displays the configuration screen.
4 Press the volume buttons to move the highlight bar on the screen
to the Factory reset option.
5 Press the Camera button to start the reset process and wait for
the smartphone to restart.
OR
To erase all data from your smartphone
CAUTION: The following steps will erase all the data including your
Google account and downloaded applications from your smartphone.
Ensure that you back up all the required data before you proceed.
1 Touch the Home button → Menu button → Settings→
Privacy→ Factory data reset→ Erase everything.
2 Touch Reset phone.
NOTE: You need to draw your screen unlock pattern if it is enabled.
3 Touch Reset phone after you read the warning.

Dell AERO hard reset

Dell AERO hard reset

Resetting the Aero  Smartphone
You can reset your smartphone to the factory default settings.

Master Clear DELL AERO

Select this option to reset all user settings to the
factory default settings and delete all data stored
on your smartphone, such as calendar events,
tasks, and contacts, including contents that you
have downloaded, such as applications,
wallpapers, and ringtones.
1 In the Settings menu, tap Master clear &
reset > Master clear.
2 Enter the master clear password. The default
password is “1234”.
3 Tap OK to reset the smartphone.

Master reset DELL AERO


Select this option to reset all user settings to the
factory default settings. However, all data stored on
your smartphone, such as Contacts, are not
deleted.
1 In the Settings menu, tap Master clear &
reset > Master reset.
2 Enter the master reset password. The default
password is “1234”.
3 Tap OK to reset the smartphone.

To Change Factory Password
In the Settings menu, tap Security > Change factory
password to change the factory password.
Restore Factory Password
In the Settings menu, tap Security > Restore factory
password to restore the factory password.

Dell Streak 7 hard reset

Dell Streak 7 hard reset

To erase all data from your device
CAUTION: The following steps will erase all the data including your
Google account and downloaded applications from your device.
Ensure that you back up all the required data before you proceed.
1 Touch the Home button > Menu button > Settings >
Privacy> Factory data reset.
2 Touch Reset tablet.
NOTE: You must draw your screen unlock pattern if it is enabled.
3 Touch Erase everything after you read the warning.
To force power off your DELL Streak 7 tablet device
DEll Streak 7 hard reset
1 Pull out the slot door.
2 Push the force power-off button using a paper clip or other
similar pointed objects.
3 Press and hold the Power and Sleep/Wake button to turn on
your device.

Starting Your Dell Streak 7 in the Safe Mode

If you find your device does not work as expected because of an
application you installed, try to start your device in the Safe mode. In
the Safe mode, all third-party applications are disabled and you can
remove any problematic applications to continue using your device
normally.
To enter the Safe mode:
1 Ensure that your device is powered off.
2 Press and hold the Power and Sleep/Wake button to turn on
your device.
The DELL logo appears twice as the device starts up.
3 When the DELL logo appears the second time, touch and hold the
Menu button until “Safe mode” appears at the bottom of the
screen.
NOTE: To exit Safe mode, turn off your device and turn it on again.

Dell Streak 7 Emergency Recovery

If your device does not turn on or respond due to corrupt system files,
you can perform an emergency recovery by restoring your device to
the factory default state, or by upgrading the software on your device.
To restore your device to the factory default state
1 Press and hold the power button and then touch the Power
off option on the screen to turn off the device.
2 Press and hold the volume up button , and without
releasing press and hold the power button , until the
configuration menu appears on the screen.
3 To restore the device to the factory default state, press the
volume up button or the volume down button to
move the highlight bar on the menu to either of these options:
• Factory reset (User data only): Restores the device to the
factory default state and erases all your user data including
contacts, settings, and downloaded applications from the
internal application storage.
• Factory reset (User data and internal tablet storage):
Restores the device to the factory default state and erases the
following data:
– All your user data including contacts, settings, and
downloaded applications stored in the internal application
storage.
– All your personal files except the preinstalled ones stored
in the internal tablet storage.
4 Press the power button to start the reset process.
5 Wait for the device to restart.

Dell Axim X3 hard reset

Performing a Reset
Soft Reset
When you perform a soft reset, the device deletes any data that has not been saved but saves any data that has been stored in memory. Try performing a soft reset if the device does not respond when you tap the display or press a button.
To perform a soft reset, use the stylus to press the reset button.
Hard reset Soft reset
Hard Reset
NOTICE: When you perform a hard reset, you lose all the data stored and any program you installed on your device.
Perform a hard reset if:
  • You want to delete all the data stored on your device.
  • You forget your password and need to clear it.
  • Your device is experiencing severe operational problems and you have already attempted a soft reset.
NOTICE: It is strongly recommended that you back up your data before you perform a hard reset. See ActiveSync Help on your computer for more information.
To perform a hard reset:
  1. Press and hold the power button.
  2. With the stylus, hold the reset button for about 2 seconds.
  3. Follow the instructions on the screen.
Hard reset Soft reset
Hard reset Soft reset

Dell Axim X30 hard reset

Performing a Reset
Soft Reset
When you perform a soft reset, the device deletes any data that has not been saved but saves any data that has been stored in memory. Try performing a soft reset if the device does not respond when you tap the display or press a button.
To perform a soft reset, use the stylus to press the reset button.
Hard reset Soft reset

Hard Reset
NOTICE: When you perform a hard reset, you lose all the data stored and any programs you installed on your device.
Perform a hard reset if:
  • You want to delete all the data stored on your device.
  • You forget your password and need to clear it.
  • Your device is experiencing severe operational problems and you have already attempted a soft reset.
NOTICE: It is strongly recommended that you back up your data before you perform a hard reset. See ActiveSync Help on your computer for more information.
To perform a hard reset:
  1. Press and hold the power button.
  2. With the stylus, hold the reset button for about 2 seconds.
  3. Follow the instructions on the screen.
Hard reset Soft reset
Hard reset Soft reset

Dell Axim X30i hard reset

Dell Axim X30i Soft Reset

When you perform a soft reset, the device deletes any data that has not been saved but saves any data that has been stored in memory. Try performing a soft reset if the device does not respond when you tap the display or press a button.
To perform a soft reset, use the stylus to press the reset button.
Hard reset Soft reset

Hard Reset
NOTICE: When you perform a hard reset, you lose all the data stored and any programs you installed on your device.
Perform a hard reset if:
  • You want to delete all the data stored on your device.
  • You forget your password and need to clear it.
  • Your device is experiencing severe operational problems and you have already attempted a soft reset.
NOTICE: It is strongly recommended that you back up your data before you perform a hard reset. See ActiveSync Help on your computer for more information.
To perform a hard reset:
  1. Press and hold the power button.
  2. With the stylus, hold the reset button for about 2 seconds.
  3. Follow the instructions on the screen.
Hard reset Soft reset
Hard reset Soft reset

Dell Axim X3i hard reset

Performing a Reset
Soft Reset
When you perform a soft reset, the device deletes any data that has not been saved but saves any data that has been stored in memory. Try performing a soft reset if the device does not respond when you tap the display or press a button.
To perform a soft reset, use the stylus to press the reset button.
Hard reset Soft reset
Hard Reset
NOTICE: When you perform a hard reset, you lose all the data stored and any program you installed on your device.
Perform a hard reset if:
  • You want to delete all the data stored on your device.
  • You forget your password and need to clear it.
  • Your device is experiencing severe operational problems and you have already attempted a soft reset.
NOTICE: It is strongly recommended that you back up your data before you perform a hard reset. See ActiveSync Help on your computer for more information.
To perform a hard reset:
  1. Press and hold the power button.
  2. With the stylus, hold the reset button for about 2 seconds.
  3. Follow the instructions on the screen.
Hard reset Soft reset
Hard reset Soft reset

Dell Axim X5 hard reset

Performing a Reset
Soft Reset
When you perform a soft reset, the device deletes any data that has not
been saved but saves any data that has been stored in memory. Try
performing a soft reset if the device does not respond when you tap the
display or press a button.
To perform a soft reset, use the stylus to press the reset button.
Hard reset Soft reset
Hard Reset
NOTICE: When you perform a hard reset, you lose all the data stored on
your device.
Perform a hard reset if:
• You want to delete all the data stored on your device.
• You forget your password and need to clear it.
• Your device is experiencing severe operational problems and you have
already attempted a soft reset.
NOTICE: It is strongly recommended that you back up your data before you
perform a hard reset. See ActiveSync Help on your computer for more
information.
To perform a hard reset:
1 Press and hold the power button.
2 With the stylus, hold the reset button for about 2 seconds.
3 Follow the instructions on the screen.

Dell Axim X50 hard reset

Performing a Reset
Soft Reset
When you perform a soft reset, the device deletes any data that has not been saved but saves any data that has been stored in memory. Try performing a soft reset if the device does not respond when you tap the display or press a button.
To perform a soft reset, use the reset stylus to press the reset button.
Hard reset Soft reset

Hard Reset
NOTICE: When you perform a hard reset, you lose all the data stored in your device memory, and any programs that you installed on your device.
Perform a hard reset if:
  • You want to delete all the data stored in your device memory.
  • You forget your password and need to clear it.
  • Your device is experiencing severe operational problems and you have already attempted a soft reset.
NOTICE: It is strongly recommended that you back up your data before you perform a hard reset. See ActiveSync Help on your computer for
more information.
To perform a hard reset:
  1. Press and hold the power button.
  2. Using the reset stylus, hold the reset button for about 2 seconds.
  3. Follow the instructions on the screen.
Hard reset Soft reset
Hard reset Soft reset

Dell Axim X50v hard reset

Performing an X50v  Reset

Soft Reset
When you perform a soft reset, the device deletes any data that has not been saved but saves any data that has been stored in memory. Try performing a soft reset if the device does not respond when you tap the display or press a button.
To perform a soft reset, use the reset stylus to press the reset button.
Hard reset Soft reset

Hard Reset
NOTICE: When you perform a hard reset, you lose all the data stored in your device memory, and any programs that you installed on your device.
Perform a hard reset if:
  • You want to delete all the data stored in your device memory.
  • You forget your password and need to clear it.
  • Your device is experiencing severe operational problems and you have already attempted a soft reset.
NOTICE: It is strongly recommended that you back up your data before you perform a hard reset. See ActiveSync Help on your computer for
more information.
To perform a hard reset:
  1. Press and hold the power button.
  2. Using the reset stylus, hold the reset button for about 2 seconds.
  3. Follow the instructions on the screen.
Hard reset Soft reset
Hard reset Soft reset

Dell Axim X51 hard reset

Resetting the Axim
Soft Reset
When you do a soft reset, the device deletes any data or active programsthat has not been saved in the flash memory. In other words, your saved files and programs are not deleted. Try a soft reset if the device does not respond when you tap the display or press a button. The soft reset is disabled when Axim is in full power off mode.
To do a soft reset, use the stylus to press the reset button.
Hard reset Soft reset
Hard Reset
NOTICE: When you do a hard reset, you lose all the data stored in your device
Flash memory, and any programs that you installed on your device.
Do a hard reset if:
  • You want to restore the device to factory default settings.
  • You forget your password and need to reset it.
  • Your device is experiencing severe operational problems and you have already attempted a soft reset.
NOTICE: It is strongly recommended that you back up your data before you do a hard reset.

To do a hard reset:
  1. Press the Power button to turn the Axim unit On.
  2. Press and hold the Power button down while using the Axim stylus to press the Reset button at the same time.
  3. Release the Power button and the Reset button. The To clear all data in the memory screen appears.
  4. Press the Contacts button on the Axim to delete all of the data in the memory of the Axim handheld.
  5. Press the Mail button on the Axim to cancel the operation without losing data.
Hard reset Soft reset

Dell Axim X51v hard reset

Resetting the Axim
Soft Reset
When you do a soft reset, the device deletes any data or active programsthat has not been saved in the flash memory. In other words, your saved files and programs are not deleted. Try a soft reset if the device does not respond when you tap the display or press a button. The soft reset is disabled when Axim is in full power off mode.
To do a soft reset, use the stylus to press the reset button.
Hard reset Soft reset
Hard Reset
NOTICE: When you do a hard reset, you lose all the data stored in your device
Flash memory, and any programs that you installed on your device.
Do a hard reset if:
  • You want to restore the device to factory default settings.
  • You forget your password and need to reset it.
  • Your device is experiencing severe operational problems and you have already attempted a soft reset.
NOTICE: It is strongly recommended that you back up your data before you do a hard reset.

To do a hard reset:
  1. Press the Power button to turn the Axim unit On.
  2. Press and hold the Power button down while using the Axim stylus to press the Reset button at the same time.
  3. Release the Power button and the Reset button. The To clear all data in the memory screen appears.
  4. Press the Contacts button on the Axim to delete all of the data in the memory of the Axim handheld.
  5. Press the Mail button on the Axim to cancel the operation without losing data.
Hard reset Soft reset

Dopod D810 hard reset

Resetting Your Pocket PC Phone

Occasionally, you may need to reset your device. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost. You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings — the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile software and other pre-installed programs will remain.

To perform a Dopod D810 CHT 9100 soft reset

Use the stylus to press the RESET button found at the bottom center part of your device. Your device restarts and displays the Today screen.
Hard reset Soft reset




To perform a Dopod D810 hard reset

Hard reset Soft reset
  1. Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom center part of your device.
  2. Release the stylus, but continue pressing the two soft key buttons. Release them only when you see the following message on your device screen: “Press SEND to restore factory default, press END to quit.“
  3. Press on your device.
    Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.

Dopod 700 hard reset

(HTC Blue Angel, Qtek 9090, i-Mate PDA2K, Dopod 700, O2 XDA-IIs, T-Mobile MDA-III, Orange SPV M2000)

Resetting the Dopod 700

You can perform a soft reset or a full reset. During a soft reset, the device is restarted and
only some data in opened programs may be lost. However, a full reset turns the battery off,
returns the device to its original factory settings, and deletes all programs, files, contacts and
other information you have saved to the device. Therefore, it is extremely important to back up
data to a storage card or your computer on a regular basis in the event that a full reset has to
be performed.

To perform a soft reset:

If your Dopod 700 responds slowly, stops responding, or freezes, you can soft reset it.
A soft reset causes the Dopod 700 to restart and re-adjust memory allocation. Unsaved
data in any opened applications may be lost. Use the stylus to press and hold the Reset button,
as shown bellow.
T-mobile MDA III hard reset

To perform a full reset:

A full device reset clears memory, deletes all data and restores the Dopod 700 to itsdefault settings.
Programs installed at the factory remain,
erasing all data that you have created and programs you
have installed.
Press and hold the power button, and then use the stylus to
press the soft reset button at the same time. Be sure you
have backed up all your data in a SD card or on your PC
before performing a full reset.
T-mobile MDA III hard reset

Dopod 515 hard reset

1. Switch off your phone.
2. Take out the SD Card from the phone.
3. With the phone powered off, press down the RECORD (it is under the power button) and the POWER button at the same time for a few sec.
4. You will be prompted to "press any key to enter bootloader".
5. Then press and HOLD DOWN the action CENTER key (joy button) Bootloader menu.

If you press any other key you get to the 3 colored "Canary" screen.

Dopod 535 hard reset

Dopod 535 hard reset

Warning: All data will be lost!
Press and hold the power key and the record key, hold both keys untill you see "enter bootloader press any key" page press and hold the middle button of the joystick (the action key).
When you see menu, select option "8"
i-Mate SP2 hard reseti-Mate SP2 hard reset

Dopod 565 hard reset

Dopod 565 hard reset with keys

Power off phone. Press both LEFT and RIGHT SOFT keys, then press POWER for a few sec. Keep holding these 3 buttons until you see
"Press 0 to restore factory default, other keys to Quit."
Press 0 to hard reset Dopod 565.

Dopod 566 hard reset

Dopod 566 hard reset hard reset with keys

Power off phone. Press both LEFT and RIGHT SOFT keys, then press POWER for a few sec. Keep holding these 3 buttons until you see
"Press 0 to restore factory default, other keys to Quit."
Press 0 to hard reset Dopod 566 586 hard reset. All data will be lost!
Dopod 566 hard reset

First, turn off the phone.
At the same time, press & hold the  Left and Right Soft Key, (keep pressing 2 keys) + press the Dopod 566 hard reset Power button once for 2 sec.
Press 0 button when it asks.
Dopod 566 hard reset will take a few minutes. Be patient.
Dopod 566 hard reset Clear Storage Dopod 566 hard reset
To access this menu, press Start in the Home screen > Accessories > Clear storage
Reset all your mobile phone settings to the default. Use with care as this will delete ALL your data.

Dopod 575 hard reset

hard reset Dopod 575 : Power off phone. Press both LEFT and RIGHT SOFT keys, then press power for 3 sec, press 0 to restore

Dopod 577w hard reset

Resetting your Phone

Resetting your phone will remove all the data from the
its memory which include contacts, tasks, calendar
appointments, and more, and restore the phone back to the
factory default settings.

To reset your phone

1. Click Start > Accessories > Clear Storage.
2. Follow the on-screen instructions to reset the phone.
The phone will restart after it has been reset.
1. Turn off your phone or take out battery and reinsert it.
2. Press and hold both the soft keys, then press POWER ON for 1 sec
3. Release POWER ON button, but keep pressing both soft keys
4. When you see the hard reset message, release soft keys and press "0" to hard reset the phone

Dopod 585 hard reset

Dopod 585 Clear Storage - Hard reset


Caution: Clear Storage erases all of your data, as well as resetting all of your Dopod585's settings back to the
manufacturer default values.
If this is what you want to do, select Accessories > ClearStorage from the Start menu. As instructed in the Clear
Storage screen, enter the digits 1234 in the field provided, then press the Right Softkey (Yes) to complete the
operation.

If your Dopod 585 is frozen, take the battery out and reinsert it, then restart your phone.
Dopod 585 reset

Dopod 585 Hard reset

Try this: Press Both Left and Right SOFT keys and power ON your Dopod 585 phone.

Dopod 595 hard reset

Restore to Default (Hard Reset)

Restore to default settings will remove all settings such as contacts,
tasks, calendar appointments, additionally installed programs, and
setup values in the memory. The phone will be reset to factory default
settings and restart. To avoid the loss of data, you can sync the data
to your computer prior to restoring the default settings. When improper
operations prevent your phone from functioning properly, you can try to
restore to factory default settings.

When the system is unable to startup, you can try to use Hard Reset
to restore to default settings. We recommend that you contact our
customer service representatives before using this function, in order
to avoid damage to your phone and data. If you need to Hard Reset
your phone, please register as a member at the Dopod website and
download the 595 software installation files to reinstall the following
software:
  • Game: Another world, Magic Puz
  • QuickMark
  • MP3 Player
  • 3D menu with Dopod Desktop Theme
  • Cyberon Voice Commander

Action: Using the Restore to Default
  1. Select Dopod 595 Hard reset Soft reset Dopod 595 Hard reset Soft resetStart
Dopod 595 Hard reset Soft reset
  1. Select Dopod 595 Hard reset Soft reset Accessories Then press Dopod 595 Hard reset Soft reset OK button
Dopod 595 Hard reset Soft reset

Open Accessories.
  1. Select Dopod 595 Hard reset Soft reset Clear Storage
Dopod 595 Hard reset Soft reset

Go to the Restore to Defaults program.
  1. Enter 1234 Then select Dopod 595 Hard reset Soft reset Yes
Dopod 595 Hard reset Soft reset

After confirmation, enter 1234 and select Yes. The phone will restart after resetting.

Action: Hard Reset Restore to Default
  1. Press & hold Dopod 595 Hard reset Soft reset Power button
Dopod 595 Hard reset Soft reset

First, turn off the phone.
  1. At the same time, press & hold the Dopod 595 Hard reset Soft reset Left/Right Soft Key, then press the Dopod 595 Hard reset Soft reset Power button once.
Dopod 595 Hard reset Soft reset

Press & hold the Left/Right soft keys, then press the power button once. Wait for the screen to reappear, then release the soft keys.
  1. Press the Dopod 595 Hard reset Soft reset number key 0 or any other keys to cancel
Dopod 595 Hard reset Soft reset

Press the number key 0 to confirm restore to defaults, or press any other keys to cancel.
Related Posts Plugin for WordPress, Blogger...

Android Phone Solution Headline Animator

Google+ Followers

Please Log in