myPhone 3010 hard reset

myPhone 3010 DUAL SIM hard reset Restore factory settings

Deletes all your settings and brings the phone back to the initial settings. This option needs the security code 1234 entered.
myphone 3010 hard reset myPhone 3010 DUAL SIM hard reset
Menu > Settings > Restore factory settings > Input password: 1234 > Yes to restore and reboot > YES
myPhpne 3010 restore to default settings
OR
USE firmware / ROM update tool MTK ROM update tool
myPhone MTK firmware ROM update tool

myPhone A320 hard reset

Create a folder at the root folder of your memory card named ‘update’, and copy all ‘*.zip’ files and ‘recover.img’ to your phone’s memory card.
With the phone turned off, press the Home key + Power & End key to enter recovery mode, do and do the following:
1.     Press the Home key to search the zip file on your memory card, and press the Home key again to update the software.
2.     Press the Call key to do board test.
3.     Press the Back key to restore the factory default settings.
4.     Press the Power & End key to reboot your phone after the update finishes.

(ROM almost Android)

myPhone 1060 Grand hard reset

Restore Factory Settings Select [Settings] → [Restore Factory Settings] to clear all personal information in the phone and restore factory settings.
myPhone 1060 default password: 1122

myPhone 1080 hard reset

Restore Factory Settings Select Menu > [Settings] → [Restore Factory Settings] to clear all personal information in the phone and restore factory settings.
myPhone 1080 default password: 1122
Restore settings? Select LEFT SOFT key for myPhone 1080 default settings.
myPhone 1080 hard resetmyPhone 1080 hard reset
myPhone 1080 hard reset

myPhone 6680 hard reset

myPhone 6680 Share dual SIM hard reset

Go to Menu > Settings > Phone setup > Restore Factory settings > Enter 1122 > Yes.
Note: You must insert at least one SIM card to see this option.
myPhone 6680 Share hard reset
OR
USE firmware / ROM update tool MTK ROM update tool
myPhone MTK firmware ROM update tool

myPhone 1055 Retto hard reset

Restore Factory Settings Select [Settings] → [Restore Factory Settings] to clear all personal information in the phone and restore factory settings.
myPhone 1055 default password: 1122
OR
USE Flash tool to hardware reset myPhone 1055 phone
myPhone flash tool hard reset
myPhone 1055 retto hard reset

myPhone 8890 hard reset

myPhone 8890 dual SIM hard reset

Go to Menu > Settings > Restore Factory settings > Enter 1122 > Yes.
myPhone 8890 Sense hard reset
OR
USE firmware / ROM update tool MTK ROM update tool
myPhone MTK firmware ROM update tool

myPhone 8855 DTV Diggy DUAL SIM hard reset

Go to Menu > Settings > Restore Factory settings > Enter 1122 > Yes.

myPhone 8855 Diggy DTV hard resetmyPhone 8855 Diggy DTV hard reset
myPhone 8855 Diggy DTV hard reset

NEC MobilePro 200 hard reset

Resetting the MobilePro HPC 200

You may sometimes wish to reset your MobilePro HPC, Always backup your data to the
desktop software before resetting the MobilePro HPC.
Step 1
Locate the RESET button on the bottom of the MobilePro HPC as shown bellow.

NEC MobilPro 200 hard reset

Step 2
Using the stylus, press the RESET button. The unit is now reset.
CAUTION
Stored data may be lost by resetting your MobilePro HPC.

NEC MobilePro 400 hard reset

Resetting the MobilePro HPC
You may sometimes wish to reset your MobilePro HPC, Always backup your data to the
desktop software before resetting the MobilePro HPC.
Step 1
Locate the RESET button on the bottom of the MobilePro HPC as shown bellow.

NEC MobilPro 400 hard reset

Step 2
Using the stylus, press the RESET button. The unit is now reset.
CAUTION
Stored data may be lost by resetting your MobilePro HPC.

NEC MobilePro 450 hard reset

Resetting the MobilePro HPC 450


You may sometimes wish to reset your MobilePro HPC, Always backup your data to the
desktop software before resetting the MobilePro HPC.
Step 1
Locate the RESET button on the bottom of the MobilePro HPC as shown bellow.

NEC MobilPro 400 hard reset

Step 2
Using the stylus, press the RESET button. The unit is now reset.
CAUTION
Stored data may be lost by resetting your MobilePro HPC.

NEC MobilePro 700 hard reset

RESETTING the MobilePro 700

Occasionally, you may need to reset your MobilePro H/PC. Before resetting the MobilePro, back up your data to the
desktop or notebook computer, if possible.
When you reset the MobilePro, you may lose stored data and unit parameter settings.
Reset the MobilePro as follows.
Open the display panel and remove the stylus from its holder.
Power on the MobilePro. (You cannot reset the unit without having the power on.)
Close the display panel and turn the MobilePro over.
Locate the Reset button on the bottom of the MobilePro.
Using the stylus, press the Reset button. This resets the unit.

NEC MobilPro 700 hard reset
If the Reset button does not respond.
Remove the main batteries and back-up battery. Reinstall the batteries and make sure they are
seated properly. Try resetting the unit again.
This procedure results in the loss of the memory contents

NEC MobilePro 750 hard reset

RESETTING THE MobilePro NEC 750

Occasionally, you may need to reset your MobilePro H/PC. Before resetting the MobilePro, back up your data to the
desktop or notebook computer, if possible.

When you reset the MobilePro, you may lose stored data and unit parameter settings.
Reset the MobilePro as follows.
1. Remove the stylus from its holder and open the display panel.
2. Power on the MobilePro. (You cannot reset the unit without the power on.)
3. Close the display panel and turn the MobilePro over.
4. Locate the Reset button on the bottom of the MobilePro.
5. Using the stylus, press the Reset button. This resets the unit.

NEC MobilPro 750 hard reset

NEC MobilePro 770 hard reset

Reset the NEC 770 MobilPro unit.

The soft reset button does not respond.
Remove the main battery. Reinstall the battery and make sure it is seated properly.
Try resetting the unit again.
If the soft reset button on the bottom of the system does not respond, you may have to use the full reset button inside the battery
bay.
This second procedure may result in the loss of the memory contents including all stored data, settings, and files.
Be sure to make regular backups.

RESETTING THE MOBILE PRO
Occasionally you may need to reset your NEC MobilePro. For instance, you may need to reset after restoring data
from your desktop or notebook computer, after modifying the MobilePro’s configuration, when you are unable to
power on using the Power button, or when the operating system stops responding.
The NEC MobilePro is equipped with two reset buttons, designed for use depending upon specific conditions. The two
reset buttons are:

Soft Reset Button – The soft reset button allows you to restart the NEC MobilePro operating system while preserving
any saved data. This method is similar to a “warm boot” on your desktop or notebook computer.
Full Reset Button – The full reset button restores your system to its original shipping configuration, erasing all
information that you have entered

Note: To ensure the safety of your information at all times, you should perform regular backups of
your MobilePro information to your desktop or notebook computer.

Using the Soft Reset Button
Before using the soft reset button to reset the MobilePro, close any open files or applications, if possible. When you
soft reset the MobilePro, you may lose open/unsaved files.
Use the soft reset button to reset the NEC MobilePro as follows.

1. Remove the stylus from its holder and open the display panel.
2. Power on the MobilePro.
3. Turn over the MobilePro.
4. Locate the soft reset button on the bottom of the MobilePro.
5. Using the stylus, press the soft reset button. (You may need to press the button more than once.) This resets
the unit.

Soft reset button
NEC MobilPro 770 reset

A – Soft reset button
Using the Full Reset Button
Use the full reset button only when your unit does not respond after doing all of the following.
Installing a charged battery.
Connecting the unit to an AC power source. Verifying that the battery lock is in the locked position.
Using the soft reset button to reset the system.


CAUTION
Using the full reset button to reset your MobilePro returns your unit to its original shipping configuration.
All data and applications are erased from RAM. All open/unsaved files are lost and all user specific
data such as contacts, tasks, etc., are erased. You can only restore data that has been backed up
to your desktop or notebook computer.

The full reset button is located inside of the main battery’s bay. Remove the battery and use the full reset button to reset
the NEC MobilePro as follows.
1. Remove the stylus from its holder and open the display panel.

2. Remove the main battery from the unit.
Locate the battery lock and release latch on the bottom of the system.
Slide the lock to the unlocked position in the direction of the arrow, as indicated in the following figure.
Slide the release latch in the direction of the arrow, as indicated in the following figure, and hold it.
Remove the battery from the bay.
Removing the battery pack

NEC MobilPro 770 reset
A – Battery release latch B – Battery release lock C – Battery pack


3. Locate the full reset button inside of the battery bay, as indicated in the following figure.
Full reset button

NEC MobilPro 770 full reset

A – Full reset button B – Battery connectors

4. Using the stylus, press the full reset button. This resets the unit and restores your system to its original shipping
configuration.
You may be able to use a recent backup of your data to restore your system to a more recent configuration.

If the touch screen does not respond.
Press Ctrl Alt = to calibrate the stylus input. Follow the on-screen instructions to complete the recalibration procedure.

NEC MobilePro 780 hard reset

RESETTING THE MOBILE PRO 780

Occasionally you may need to reset your NEC MobilePro.
For instance, you may need to reset after restoring data from your host PC, after modifying the MobilePro’s configuration,
when you are unable to power on using the Power button, or when the operating system stops responding.
The NEC MobilePro is equipped with two reset buttons, designed for use depending upon specific conditions. The
two reset buttons are:
"Soft Reset Button – The soft reset button allows you to restart the NEC MobilePro operating system while
preserving any saved data. This method is similar to a “warm boot” on your host PC.
"Full Reset Button – The full reset button restores your system to its original shipping configuration, erasing
all information that you have entered.

To ensure the safety of your information at all times, you should perform regular backups ofyour MobilePro information to your host PC.

Using the Soft Reset Button
Before using the soft reset button to reset the MobilePro, close any open files or applications, if possible. When you
soft reset the MobilePro, you may lose open/unsaved files.
Use the soft reset button to reset the NEC MobilePro as follows.
1. Open the display panel and remove the stylus from its holder.
2. Power on the MobilePro.
3. Turn over the MobilePro.
4. Locate the soft reset button on the bottom of the MobilePro.
5. Using the stylus, press the soft reset button. (You may need to press the button more than once.) This resets the unit.

Soft reset button

NEC MobilPro 780 reset

A – Soft reset button

Using the Full Reset Button
Use the full reset button only when your unit does not respond after doing all of the following.
"Installing a charged battery.
"Connecting the unit to an AC power source.
"Verifying that the battery lock is in the locked position.
"Using the soft reset button to reset the system.

CAUTION
Using the full reset button to reset your MobilePro returns your unit to its original shipping configuration.
All data and applications are erased from RAM. All open/unsaved files are lost and all user specific data
such as contacts, tasks, etc., are erased.

The full reset button is located inside of the main battery’s bay. Follow these steps to remove the battery and use the
full reset button to reset the NEC MobilePro.
1. Open the display panel and remove the stylus from its holder.
2. Remove the main battery as follows:
"Locate the battery lock and release latch on the bottom of the system.
"Slide the lock to the unlocked position in the direction of the arrow, as indicated in the following figure.
"Slide the release latch in the direction of the arrow, as indicated in the following figure, and hold it.
"Remove the battery from the bay. Removing the battery pack
NEC MobilPro 780 hard reset

A – Battery release latch B – Battery release lock C – Battery pack

3. Locate the full reset button inside of the battery bay, as indicated in the following figure.
Full reset button

NEC MobilPro 780 hard reset

A – Full reset button B – Battery connectors
4. Using the stylus, press the full reset button. This resets the unit and restores your system to its original shipping
configuration.
You may be able to use a recent backup of your data to restore your system to a more recent configuration.

NEC MobilePro 790 hard reset

Resetting the MobilePro 790


Occasionally you may need to reset your NEC MobilePro. For instance, you may need to reset after restoring data from your host PC, after
modifying the MobilePro's configuration, when you are unable to power on using the Power button, or when the operating system stops
responding.
The NEC MobilePro is equipped with two reset buttons, designed for use depending upon specific conditions. The two reset buttons are:
! Soft Reset Button The soft reset button allows you to restart the NEC MobilePro operating system while preserving any saved data.
This method is similar to a 'warm boot' on your host PC.
! Full Reset Button The full reset button restores your system to its original shipping configuration, erasing all information that you have
entered.
Note To ensure the safety of your information at all times, you should perform regular backups of your MobilePro information to your host PC.
For more information, see the section in Chapter 3, 'Backing Up and Restoring Data.'

Using the Soft Reset Button

Before using the soft reset button to reset the MobilePro, close any open files or applications, if possible. When you soft reset the MobilePro, you may lose open/unsaved files.
Follow these steps to use the soft reset button to reset the MobilePro.

1. Open the display panel and remove the stylus from its holder.
2. Power on the MobilePro.
3. Turn over the MobilePro.
4. Locate the soft reset button on the bottom of the MobilePro.
5. Using the stylus, press the soft reset button. (You may need to press
the button more than once.) This resets the unit.

NEC MobilePro 790 Hard reset Soft reset

Using the Full Reset Button
Use the full reset button only when your unit does not respond after doing all of the following:
! Installing a charged battery.
! Connecting the unit to an AC power source.
! Verifying that the battery lock is in the locked position.
! Using the soft reset button to reset the system.

Using the full reset button to reset your
MobilePro returns your unit to its original shipping configuration. All data and applications are erased from RAM. All open/unsaved files are lost and all user specific data such as contacts, tasks, etc., are erased.
You can only restore data that has been backed up to your host PC. For more information, see the section in Chapter 3, 'Backing Up and Restoring Data.'

The full reset button is located inside of the main battery's bay. Follow
these steps to remove the battery before using the full reset button to reset the NEC MobilePro.

1. Open the display panel and remove the stylus from its holder.
2. Remove the battery pack as follows:
! Locate the battery lock and release latch on the bottom of the system.
! Slide the lock to the unlocked position in the direction of the arrow, as indicated in the following figure.
! Slide the release latch in the direction of its arrow, as indicated in the following figure, and hold it.
! Remove the battery from the bay.

Removing the battery pack

NEC MobilePro 790 Hard reset Soft reset

3. Locate the full reset button inside of the battery bay, as indicated in the following figure.

NEC MobilePro 790 Hard reset Soft reset

4. Using the stylus, press the full reset button. This resets the unit and restores your system to its original shipping configuration.
You may be able to use a recent backup of your data to restore your system to a more recent configuration. Refer to MicroSoft
ActiveSync on your host PC or the section in Chapter 3, 'Backing Up and Restoring Your Data,' for details about backing up and restoring
your MobilePro.

NEC MobilePro 800 hard reset

Resetting the MobilePro


Occasionally you may need to reset your NEC MobilePro.
For instance, you may need to reset after restoring data from
your host PC, after modifying the MobilePro's configuration,
when you are unable to power on using the Power button, or
when the operating system stops responding.
The NEC MobilePro is equipped with two reset buttons: a
soft reset button and a full reset button. Read the following
descriptions to better understand the functions of and the
differences between the buttons.
„ Soft Reset Button — The soft reset button allows you to
restart the NEC MobilePro operating system while
preserving any saved data. This method is similar to a
“warm boot” on your host PC.

Full Reset Button — The full reset button restores your
system to its original shipping configuration, erasing all
information that you have entered.
Note: To ensure the safety of your
information at all times, you should perform
regular backups of your MobilePro information to
your host PC
Using the Soft Reset Button
Before using the soft reset button to reset the MobilePro,
close any open files or applications, if possible. When you
soft reset the MobilePro, you may lose open/unsaved files.
Follow these steps to use the soft reset button to reset the
MobilePro.
1. Open the display panel and remove the stylus from its
holder.
2. Power on the MobilePro.
3. Locate the soft reset button above the top right of the
keyboard.
4. Using the stylus, press the soft reset button. (You may
need to press the button more than once.) This resets the
unit.
NEC MP800 hard reset

Using the M800 Full Reset Button

Use the full reset button only when your unit does not
respond after doing all of the following:
„ Installing a charged battery.
„ Connecting the unit to an AC power source.
„ Using the soft reset button to reset the system.
Using the full reset button to reset your
MobilePro returns your unit to its original
shipping configuration. All data and applications
are erased from RAM. All open/unsaved files are
lost and all user specific data such as contacts,
tasks, etc., are erased.
You can only restore data that has been backed
up to your host PC.
The full reset button is located inside of the main battery's
bay. Follow these steps to remove the battery before using the
full reset button to reset the NEC MobilePro.
1. Open the display panel and remove the stylus from its
holder.
2. Remove the battery pack as follows:
„ Locate the battery release latch on the bottom of the
system.
„ Slide the release latch in the direction of its arrow and
hold it.
„ Remove the battery from the bay.
Removing the battery pack
NEC MP800 hard reset

A – Battery connectors B – Battery release latch C – Battery pack
3. Locate the full reset button inside of the battery bay, as
indicated in the following figure.
Full reset button
NEC MP800 hard reset
A – Battery connectors B – Full reset button

4. Remove the USB mouse, if connected.
5. Using the stylus, press the full reset button. This resets the
unit and restores your system to its original shipping
configuration.
You may be able to use a recent backup of your data to
restore your system to a more recent configuration.

NEC MobilePro 880 hard reset

NEC MobilePro 880 soft reset

Resetting the MobilePro
Occasionally you may need to reset your NEC MobilePro.
For instance, you may need to reset after restoring data from
your host PC, after modifying the MobilePro's configuration,
when you are unable to power on using the Power button, or
when the operating system stops responding.

The NEC MobilePro is equipped with two reset buttons: a
soft reset button and a full reset button. Read the following
descriptions to better understand the functions of and the
differences between the buttons.

Soft Reset Button — The soft reset button allows you to
restart the NEC MobilePro operating system while
preserving any saved data. This method is similar to a
“warm boot” on your host PC.
NEC MobilPro 880 hard reset
A – Soft reset button
Using the Soft Reset Button
Before using the soft reset button to reset the MobilePro,
close any open files or applications, if possible. When you
soft reset the MobilePro, you may lose open/unsaved files.
Follow these steps to use the soft reset button to reset the
MobilePro.
1. Open the display panel and remove the stylus from its holder.
2. Power on the MobilePro.
3. Locate the soft reset button above the top right of the keyboard.
4. Using the stylus, press the soft reset button. (You may
need to press the button more than once.) This resets the
unit.
Press the soft reset button to reset the unit.
If the soft reset button does not respond.
Remove the main battery.
Reinstall the battery and make
sure it is seated properly. Try resetting the unit again.
If the soft reset button at the top of the keyboard does not respond,
use the full reset button inside the battery bay.

NEC MobilePro 880 hard reset

Full Reset Button — The full reset button restores your
system to its original shipping configuration, erasing all
information that you have entered.
Using the Full Reset Button
Use the full reset button only when your unit does not
respond after doing all of the following:
„ Installing a charged battery.
„ Connecting the unit to an AC power source.
„ Using the soft reset button to reset the system.
The full reset button is located inside of the main battery's
bay. Follow these steps to remove the battery before using the
full reset button to reset the NEC MobilePro.
1. Open the display panel and remove the stylus from its
holder.
2. Remove the battery pack as follows:
„ Locate the battery release latch on the bottom of the
system.
„ Slide the release latch in the direction of its arrow and
hold it. Remove the battery from the bay.
Removing the battery pack
NEC MobilPro 880 hard reset
A – Battery connectors B – Battery release latch C – Battery pack
3. Locate the full reset button inside of the battery bay, as
indicated in the following figure.
Full reset button
NEC MobilPro 880 hard reset
A – Battery connectors B – Full reset button
4. Remove the USB mouse, if connected.
5. Using the stylus, press the full reset button. This resets the
unit and restores your system to its original shipping
configuration.
You may be able to use a recent backup of your data to
restore your system to a more recent configuration.
CAUTION
Using the full reset button to reset your
MobilePro returns your unit to its original
shipping configuration. All data and applications
are erased from RAM. All open/unsaved files are
lost and all user specific data such as contacts,
tasks, etc., are erased.
You can only restore data that has been backed
up to your host PC.
Note: To ensure the safety of your
information at all times, you should perform
regular backups of your MobilePro information to
your host PC.

NEC MobilePro 900 hard reset

Resetting the NEC MobilePro 900

Occasionally you may need to reset your MobilePro. For instance, you
may need to reset after restoring data from your host PC, after
modifying the MobilePro’s configuration, when you are unable to
power on using the Power button, or when the operating system stops
responding.
The MobilePro is equipped with a reset button that allows you to
restart the MobilePro operating system while preserving any saved
data. This method is similar to a “warm boot” on your host PC.
Note To ensure the safety of your information at all times, you
should perform regular backups of your MobilePro information to your
host PC.
Before using the reset button to reset the MobilePro, close any open
files or applications, if possible. When you reset the MobilePro, you
may lose open/unsaved files.
Follow these steps to use the reset button to reset the MobilePro.

1. Open the display panel and remove the stylus from its holder.
2. Power on the MobilePro.
3. Turn over the MobilePro.
4. Locate the reset button on the bottom of the MobilePro (see the
following figure).
5. Using the stylus, press the reset button. (You may need to press
the button more than once.) This resets the unit.
NEC MobilePro 900 hard reset
The reset button design requires the use of
the stylus. Only use the MobilePro 900 stylus to reset the system. Use
of another tool can damage the MobilePro.

NEC MobilePro 900c hard reset

Resetting the NEC MobilePro 900C

Occasionally you may need to reset your MobilePro. For instance, you
may need to reset after restoring data from your host PC, after
modifying the MobilePro’s configuration, when you are unable to
power on using the Power button, or when the operating system stops
responding.
The MobilePro is equipped with a reset button that allows you to
restart the MobilePro operating system while preserving any saved
data. This method is similar to a “warm boot” on your host PC.
Note To ensure the safety of your information at all times, you
should perform regular backups of your MobilePro information to your
host PC.
Before using the reset button to reset the MobilePro, close any open
files or applications, if possible. When you reset the MobilePro, you
may lose open/unsaved files.
Follow these steps to use the reset button to reset the MobilePro.

1. Open the display panel and remove the stylus from its holder.
2. Power on the MobilePro.
3. Turn over the MobilePro.
4. Locate the reset button on the bottom of the MobilePro (see the
following figure).
5. Using the stylus, press the reset button. (You may need to press
the button more than once.) This resets the unit.
NEC MobilePro 900 hard reset
The reset button design requires the use of
the stylus. Only use the MobilePro 900c stylus to reset the system. Use
of another tool can damage the MobilePro.

NEC MobilePro P300 hard reset

C - Reset Button — performs a soft reset of the operating system in case of malfunction. Your
data is preserved if it was saved.
You can also use the reset button and power button to do a hard reset.
Save your data to a CF card or to your computer before doing a hard
reset or your data is lost when you do a hard reset.

Be careful how you hold the MobilePro to avoid accidentally touching or pressing the recording
button while simultaneously pressing the reset and power buttons
Simultaneously press and hold the reset button and the power button to do a NEC MobilePro P300 hard reset.
NEC MobilePro P300

O2 XDA Zest hard reset

O2 XDA Zest hard reset

Warning! All your data will be deleted. Backup all necessary data first!
Press navigation UP + press the RESET hole
O2 Xda ZEST hard reset

O2 XDA Serra hard reset

O2 Xda Serra Raphael Soft reset

Resetting Your Device

Occasionally, you may need to reset your device. A soft (or normal) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work
will be lost.

To perform a soft reset

O2 Xda Serra hard reset O2 Xda Serra soft reset

1. Pull out the stylus.
2. Use the stylus tip to press the RESET button located at the bottom of the device. Your device restarts and displays the Home screen.

O2 Xda Serra hard reset

You can also perform a hard reset (also known as a full reset). A hard
reset should only be performed if a normal reset does not solve a system
problem. After a hard reset, the device is restored to its default settings—
the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.

Warning! Your device will be set back to factory default settings. Make sure that any additional installed programs and/or user data have been backed up before you perform a hard reset.

Important
If Encrypt files when placed on a storage card is enabled, backup all files from the storage card before using Clear Storage, hard reset, or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.
O2 Xda Serra hard reset O2 Xda Serra soft reset

To perform a hard reset

1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and ENTER buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and ENTER buttons until you see this message on the screen:



4. Release the VOLUME DOWN and ENTER buttons, then press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.

Clear Storage

You can also use Clear Storage to reset your device back to factory default settings.

1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.

O2 Xda Ignito hard reset

O2 Xda Ignito Soft reset

Resetting Your Device

If you experience some sluggishness with your device, you can perform a reset to shut down all programs and restart your
device.

To perform a soft reset

1. Pull out the stylus.
2. Use the stylus to press the RESET button located at the opening of the stylus compartment. Your device restarts and displays the Home screen.
O2 Xda Ignito hard reset O2 Xda Ignito soft reset

O2 Xda Ignito hard reset

You can also perform a hard reset (also known as a full reset). A hard
reset should only be performed if a normal reset does not solve a system
problem. After a hard reset, the device is restored to its default settings—
the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.

Warning! Your device will be set back to factory default settings. Make sure that any additional installed programs and/or user data have been backed up before you perform a hard reset.

O2 Xda Ignito hard reset O2 Xda Ignito soft resetO2 Xda Ignito hard reset O2 Xda Ignito soft reset

To perform a O2 Ignito hard reset

1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and
ENTER buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and ENTER buttons until you see this message on the screen:

O2 Xda Ignito hard reset O2 Xda Ignito soft reset

4. Release the VOLUME DOWN and ENTER buttons, then press the
VOLUME UP button to perform the hard reset, or press any other
button to cancel the reset.



Clear Storage

You can also use Clear Storage to reset your device back to factory default settings and/or format the internal storage.

1. On the Home screen, slide to the Settings tab and then tap All
Settings.
2. On the System tab, tap Clear Storage.
3. In the drop-down menu, select whether to Clear Storage only,
Format internal storage only, or Clear storage and format internal storage.
4. Enter “1234” and then tap Yes.

O2 Diamond hard reset

O2 Diamond Soft reset


Resetting Your Device

If you experience some sluggishness with your device, you can perform a reset to shut down all programs and restart your
device.

To perform a soft reset
>O2 Diamond hard reset O2 Diamond soft reset

1. Pull out the stylus.
2. Use the stylus to press the RESET button located at the opening of the stylus compartment. Your device restarts and displays the Home screen.

O2 Diamond hard reset O2 Diamond soft reset


O2 Diamond hard reset


You can also perform a hard reset (also known as a full reset). A hard
reset should only be performed if a normal reset does not solve a system
problem. After a hard reset, the device is restored to its default settings—
the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.

Warning! Your device will be set back to factory default settings. Make sure that any additional installed programs and/or user data have been backed up before you perform a hard reset.

O2 Diamond hard reset O2 Diamond soft reset

To perform a O2 Diamond hard reset reset TELUS Touch Diamond

1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and
ENTER buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and ENTER buttons until you see this message on the screen:

O2 Diamond hard reset O2 Diamond soft reset

4. Release the VOLUME DOWN and ENTER buttons, then press the
VOLUME UP button to perform the hard reset, or press any other
button to cancel the reset.



Clear Storage

You can also use Clear Storage to reset your device back to factory default settings and/or format the internal storage.

1. On the Home screen, slide to the Settings tab and then tap All
Settings.
2. On the System tab, tap Clear Storage.
3. In the drop-down menu, select whether to Clear Storage only,
Format internal storage only, or Clear storage and format internal storage.
4. Enter “1234” and then tap Yes.
Related Posts Plugin for WordPress, Blogger...

Android Phone Solution Headline Animator

Google+ Followers

Please Log in