Palm Treo 700p hard reset

Soft Reset

1. Turn off wireless mode by pressing and holding the red Power/End key.
2. Remove the battery cover.
3. Take out the battery.
4. Put the battery back in.
5. Replace the battery cover.
6. After a soft reset, a logo screen appears, followed shortly by a Preferences screen asking you to set time and date.

System (Warm) Reset

1. Press and hold the UP button on the front panel of your device.
2. Use an unfolded paper clip, or the reset tool at the tip of your stylus. Gently press and release the RESET button inside the hole on the back panel of your device
3. If you see a progress bar (see below), keep holding the UP button.
4. Next, the Palm Powered screen (see below) will appear. Release the UP button when you see it.
5. Important: Perform a soft reset after confirming that the System Reset fixed your issue.

Palm Treo 700p hard reset

1. Press and hold the Power (on/off) button on the front panel of your device.
2. While holding Power, use an unfolded paper clip, or the reset tool at the tip of your stylus. Gently press and release the RESET button inside the hole on the back panel of your device.
3. If you see a progress bar (see below), keep holding the Power button.
4. Next, the Palm Powered screen will appear. Release the Power button when you see it.
5. You'll see a screen that asks: Erase all data? YES = "up" button NO = any other button. Press UP on your 5-way navigator to complete the hard reset.

Your device will then take you through a series of screens to calibrate the digitizer and verify the time and date.

Note: A hard reset does not delete the current date and time. It does restore other settings to the factory default.

Warning: A hard reset will erase everything on your device. All your data will be removed, and formats, preferences and other settings are restored to their factory default settings. Don't perform a hard reset unless you've backed up your data, or you're willing to lose everything.

Your device will then take you through a series of screens to calibrate the digitizer and verify the time and date.

Note: A hard reset does not delete the current date and time. It does restore other settings to the factory default.

On some devices, you may see a Palm or palmOne logo and a progress bar first. Do not release the Power button until the second, circular Palm Powered logo appears.

Keep holding the Power button during this screen, then release the Power button.

OR

Keep holding the Power button when you see the progress bar. Release the Power button when the progress bar completes and disappears.