Unitech PA962 hard reset

hard reset Unitech PA962 Warm Boot

To perform a warm boot while the PA962 is operating, insert a pin (paper clip works well) into the reset hole on the back of the terminal, right below the PCMCIA cover.

Under the Windows folder of your terminal, locate the file BootMode.exe, execute the program, and confirm the warning message.

WARNING: Warm Boot will cause unsaved data to be lost.

Cold Boot
Press the coldboot buttom underneith the PCMCIA cover, the terminal will perofrm coldboot.
NOTE: Cold Boot will cause the PA962 to return to its original factory settings.

Terminal either dow not respond, or responds inaccurately to touch screen input.

Perform a warm boot - WARNING - Unsaved data will be lost.
or
Perform a cold boot - WARNING - Terminal will be reset to default settings and data will be lost.

PA962 Terminal does not power on. Terminal shuts itself down.  Terminal either dow not respond,
or responds inaccurately to touch screen input. Bar code not read. Terminal will not shut off.

Unitech PA963 hard reset

hard reset Unitech PA963 Warm Boot

To perform a warm boot while the PA963 is operating, insert a pin (paper clip works well) into the reset hole on the back of the terminal, right below the PCMCIA cover.

Under the Windows folder of your terminal, locate the file BootMode.exe, execute the program, and confirm the warning message.

WARNING: Warm Boot will cause unsaved data to be lost.

Cold Boot
Press the coldboot buttom underneith the PCMCIA cover, the terminal will perofrm coldboot.
NOTE: Cold Boot will cause the PA963 to return to its original factory settings.

Terminal either dow not respond, or responds inaccurately to touch screen input.

Perform a warm boot - WARNING - Unsaved data will be lost.
or
Perform a cold boot - WARNING - Terminal will be reset to default settings and data will be lost.

PA962 Terminal does not power on. Terminal shuts itself down.  Terminal either dow not respond,
or responds inaccurately to touch screen input. Bar code not read. Terminal will not shut off.

Unitech PA966 hard reset

Unitech PA966 Warm Boot / Cold Boot

Warm Boot

To perform a warm boot while the PA966 is operating, insert a pin (paper clip works well) into the
reset hole on the back of the terminal, right below the PCMCIA cover.

Under the Windows folder of your terminal, locate the file BootMode.exe, execute the program, and
confirm the warning message.

WARNING: Warm Boot will cause unsaved data to be lost

Cold Boot
Press the coldboot button underneath the PCMCIA cover, the terminal will perform cold boot.
NOTE: Cold Boot will cause the PA966 to return to its original factory settings

Unitech PA966 hard reset

Unitech PA966 Warm Boot / Cold Boot

Warm Boot

To perform a warm boot while the PA966 is operating, insert a pin (paper clip works well) into the
reset hole on the back of the terminal, right below the PCMCIA cover.

Under the Windows folder of your terminal, locate the file BootMode.exe, execute the program, and
confirm the warning message.

WARNING: Warm Boot will cause unsaved data to be lost

Cold Boot
Press the coldboot button underneath the PCMCIA cover, the terminal will perform cold boot.
NOTE: Cold Boot will cause the PA966 to return to its original factory settings

Unitech PA967 hard reset

Unitech PA967 Warm Boot / Cold Boot

Warm Boot

To perform a warm boot while the PA967 is operating, insert a pin (paper clip works well) into the
reset hole on the back of the terminal, right below the PCMCIA cover.

Under the Windows folder of your terminal, locate the file BootMode.exe, execute the program, and
confirm the warning message.

WARNING: Warm Boot will cause unsaved data to be lost

Cold Boot
Press the coldboot button underneath the PCMCIA cover, the terminal will perform cold boot.
NOTE: Cold Boot will cause the PA967 to return to its original factory settings

Unitech PA970 Warm Boot / Cold Boot

Via Hardware: To perform a warm boot while the PA970 is operating, insert the end of an unfolded paperclip into the reset hole on the back
of the terminal, right below the SD Card compartment cover.

Via Software: Under the Windows folder of your terminal, locate the file BootMode.exe, execute the program, and confirm the warning message

WARNING: Warm Boot will cause unsaved data to be lost.

Unitech PA970 Cold Boot

• To perform a coldboot, press the coldboot button inside the SD Card compartment

WARNING: Cold Boot will cause the PA970 to return to its original factory settings.

Perform a warm boot - WARNING - Unsaved data will be lost Perform a cold boot - WARNING - Terminal will be reset to
factory default settings and data will be lost

Unitech PA982 hard reset

You may have to perform a reset if the device freezes (i.e., device no longer responds to the buttons on
the screen).
Performing a Warm Boot
A warm boot allows your device to get a fresh start, similar to rebooting a computer. This will restart
your device and adjust memory allocation. All records and entries are retained after a warm boot.
Unsaved data in open programs may in some cases be lost.
1. Tap Start → Programs → Utilities → Boot Mode:

The BootMode screen opens.
2. Tap Warm Boot. The system is reset and you will
lose all unsaved data.
Alternatively, to perform a warm boot, lightly press
the tip of the stylus to the reset button located on the
rear of the PA982.

Performing a Cold Boot

A cold boot cuts off power to your device, erasing all records and entries, deleting all programs you
have added, and restoring the device to default factory settings.
Never perform a cold boot unless a soft reset does not correct your problem. When you perform your
next ActiveSync operation, you can restore any data that you previously synchronized to your computer
or you can restore data that you backed up to a storage card.
You can perform a cold boot using the Boot Mode utility in the operating system, or by pressing the
Cold Boot hardware reset button in the PCMCIA bay.
Performing a Cold Boot using the Boot Mode Utility
1. Tap Start → Programs → Utilities → Boot Mode.

The BootMode screen opens.
2. Tap Cold Boot. The system is reset and you will lose all
data including all files in the RAM memory.
NOTE: When you perform a hard reset, the date and time
settings are not be retained. Formats, preferences,
and other settings are restored to their default factory
settings.

Performing a Cold Boot using the Hardware Reset Button

The hardware reset button enables you to reset the PA982 in the even that the operating system does
not work or boot up.

Unitech PT630D hard reset

PT630D cold start

Caution:
The following process will clear all data in PT630 RAM disk memory) Reset (cold start) the PT630, press [CMD], [Back] and []
simultaneously, press [3] in “Start Menu” press ENTER.

Make sure to back up your data in PDT before making the replacement the 3V 190mAH Lithium Data Backup battery.

Unitech RH767 hard reset

Use the Reset Button on the back side of the RFID Handheld Reader
Uses paper clip press into the button to reset your device.

CAUTION! Operating the RH767 for the first time without the AC adapter, and without fully charging the backup battery may result in loss of data stored in RAM memory. When the main battery is removed, the backup battery retains RAM data in memory for 72 hours; charge the battery as soon as possible to avoid the data loss in RAM memory.

Unitech RH767 cold boot reset

To Warm Start the Unitech RH767 terminal boot mode utility
After a cold boot the unitech RH767 welcome screen appears for a moment followed by the calibration screen.

Vadem Clio C-1000 hard reset

Resetting Clio C-1000 - Soft reset

If the device does not turn on or appears frozen, you may need to reset the device.

Warning: You will lose any unsaved changes in files or programs when you reset Clio C1000. All running applications will exit upon reset.

To reset the device, use the Clio stylus to push the reset switch.
This switch is recessed on the bottom of the device, recessed behind a hole to protect it from accidental triggering. It
is labeled RESET.

Clearing Clio C-1000 Memory - Hard reset

Warning: Clearing memory will completely erase all data on the system. This should only be done as an emergency procedure or when you wish to completely erase all data; for example, when assigning your device to a new owner.

To clear memory:
1. Synchronize information to your desktop PC.
Backup any files or programs you need.
2. Remove the memory module cover.
3. Press the silver and black Memory Erase button (under the memory module cover), and simultaneously press the
RESET switch with the stylus.
With Clio face down and its Notification LED/switch facing you, the Memory Erase button can be found adjacent to the RAM module.
4. Replace the memory module cover. Be sure the cover is firmly in place.
5. Power on the device.
6. Synchronize with your desktop PC to restore your data.

Vadem Clio C-1050 hard reset

Resetting Clio - Soft reset

If the device does not turn on or appears frozen, you may need to reset the device.

Warning: You will lose any unsaved changes in files or programs when
you reset Clio. All running applications will exit upon reset.

To reset the device, use the Clio stylus to push the reset switch.
This switch is recessed on the bottom of the device,
recessed behind a hole to protect it from accidental triggering. It
is labeled RESET.

Clearing Clio C-1050 Memory - Hard reset

Warning: Clearing memory will completely erase all data on the
system. This should only be done as an emergency procedure
or when you wish to completely erase all data; for example,
when assigning your device to a new owner.

To clear memory:
1. Synchronize information to your desktop PC.
Backup any files or programs you need.
2. Remove the memory module cover.
3. Press the silver and black Memory Erase button (under
the memory module cover), and simultaneously press the
RESET switch with the stylus.
With Clio face down and its Notification LED/switch facing
you, the Memory Erase button can be found adjacent to the
RAM module.
4. Replace the memory module cover.
Be sure the cover is firmly in place.
5. Power on the device.
6. Synchronize with your desktop PC to restore your data.

Verizon Thunderbolt hard reset

Restarting or factory resetting your Verizon Thunderbolt 4G LTE phone

Restarting your phone (soft reset)
If your phone is running slower than normal, an application is not performing properly, or your phone becomes unresponsive, try restarting your phone and see if that helps solve the problem.
If the display is off, press the POWER button to turn it back on.
Unlock your phone if the Lock screen is displayed.
Press and hold the POWER button, and then tap Restart.
When asked to confirm, tap Restart.
If you can’t restart the phone following the above steps, remove the battery, wait for a few seconds, reinsert the battery, and then turn the phone on.

Performing a HTC Thunderbolt factory reset (hard reset)

Performing a HTC Thunderbolt LTE 4G factory reset using phone buttons

If you can’t turn on your phone or access the phone settings, you can still perform a factory reset by using the buttons on the phone.
With the phone turned off, press and hold the VOLUME DOWN button, and then press the POWER button for a while.
Wait for the screen with the three Android images to appear, and then release the VOLUME DOWN button.
Press VOLUME DOWN to select FACTORY RESET, and then press the POWER button.

If you’re passing your phone on to someone else or your phone has a persistent problem that cannot be solved, you can do a factory reset (also called a hard reset). This returns your phone to the state it was in before the first time you turned it on.
Factory reset will not erase the data and files that are on the storage card.
Factory reset is not a step to be taken lightly. It’ll permanently delete all your data and customized settings, and will remove any applications you’ve downloaded and installed. Be sure to back up any data and files you want to keep before you do a factory reset.

Performing a factory reset via settings

From the Home screen, press MENU, and then tap Settings.
Tap SD & phone storage > Factory data reset.
On the Factory data reset screen, tap Reset phone, and then tap Erase everything.

Verizon XV6600 hard reset

Resetting the Verizon XV6600
You can perform a soft reset or a full reset. During a soft reset, the device is restarted and
only some data in opened programs may be lost. However, a full reset turns the battery off,
returns the device to its original factory settings, and deletes all programs, files, contacts and
other information you have saved to the device. Therefore, it is extremely important to back up
data to a storage card or your computer on a regular basis in the event that a full reset has to
be performed.

To perform a soft reset:

If your Verizon XV6600 responds slowly, stops responding, or freezes, you can soft reset it.
A soft reset causes the Verizon XV6600 to restart and re-adjust memory allocation. Unsaved
data in any opened applications may be lost. Use the stylus to press and hold the Reset button,
as shown bellow.

To perform a full reset:

A full device reset clears memory, deletes all data and restores the Verizon XV6600 to itsdefault settings.

Programs installed at the factory remain,
erasing all data that you have created and programs you
have installed.
Press and hold the power button, and then use the stylus to
press the soft reset button at the same time. Be sure you
have backed up all your data in a SD card or on your PC
before performing a full reset.

Verizon XV6700 hard reset

To perform a soft reset:

Use the stylus to lightly press and hold the RESET button on the bottom of your PPC-6700. The device restarts, and then displays the Today screen.

Tip:To avoid data lost, please turn off your device before performing a soft reset.

To perform a Verizon XV6700 hard reset:

1. Press and hold both SOFT KEYs on the device. Keep these keys pressed, and at the same time, use the stylus to lightly press and hold the RESET button on the bottom of your device.
2. Press either Y to restore to factory default, or N to exit the hard reset process.

Vertu Constellation RM681V hard reset

Vertu Constellation RM681V hard reset

If your phone stops responding
Press and hold down the power key for about 8 seconds, until the phone vibrates and switches off.
Switch the phone back on if necessary.
No content, such as contacts or messages, is deleted.

Restore original settings

If your phone is not working properly, you can reset some settings to their original values.
1 End all active calls and connections.
2 Select Menu > Settings and Phone > Phone management > Factory settings > Restore.
3 Enter the lock code.
This does not affect documents or files stored on your phone.
After restoring the original settings, the phone switches off, and then on again. This may take longer than usual.

Vertu Ascent hard reset

RESTORE DEFAULT SETTINGS

Reset all menu settings that you have changed to the default settings set by Vertu at the manufacturing facility.

Entries in your phone book, security codesand levels, earpiece volume and call timersand counters remain unchanged.

To restore default settings:

From the stand-by display, press menu.

> Scroll to settings.
> Press select.
> Scroll to restore default settings.
> Press select.
> Key in the security code.
> Press ok. A confirmation message appears.

ViewSonic V35 hard reset

ViewSonic V35 soft reset

Resetting your V35

CAUTION: Resetting will cause unsaved data to be lost.
Resetting your V35 is similar to restarting your PC. It restarts the operating system, but you will lose any unsaved data. Occasionally, you may need to reset your V35. For example, you should reset your V35:
• After you restore data from your PC.
• When your V35 stops responding. (In other words, it appears to be “frozen” or “locked up.”)
Follow this procedure to reset your V35:
1 Remove the memory card (if installed).
2 Unscrew the tip of your stylus. Use the tip to press the reset button on the side of your V35.

ViewSonic V35 hard reset

Restoring Factory Defaults

In some cases, you may need to restore your V35 to the factory default settings by clearing the memory (RAM) from your V35. For example, you should clear the memory:

• When your V35 does not respond after being reset.
• When you forget your password.

Clearing the memory means all data you have entered in RAM, including all files, system settings, and additional programs you have installed, will be erased. (Programs installed to ROM at the factory are not affected.)

CAUTION:

• To ensure the integrity of your data should it be necessary to clear
the memory, you are advised to regularly back up to your PC (using
ActiveSync), or to an optional SD card (using the backup
application).
• Do not push the battery switch unless it is necessary

Follow this procedure to clear the memory from your V35:

1 Disconnect all cables, including the AC adapter, from your V35.
2 Unscrew the tip of the stylus. Use the tip to push the battery switch to the OFF (up) position.

3 Wait for three (3) minutes then push the battery switch to the ON (down) position.
4 The Notification indicator will flash red for approximately 30 seconds, and then your V35 will automatically turn on and display the Welcome Wizard screen.
NOTE: If the battery runs completely out of power and is not re-charged in time, the memory of your V35 will be cleared.

ViewSonic V36 hard reset

Resetting the V36 (warm boot)

CAUTION: Resetting will cause unsaved data to be lost. Resetting your V36 is similar to restarting your PC. It restarts the operating system, and you will lose any unsaved data. Occasionally, you may need to reset your V36. For example, you should reset your V36:

• After you restore data from your PC.
• When your V36 stops responding. (In other words, it appears to be "frozen" or "locked up.")

To reset your V36, do the following:

1. If you have a memory card or a 802.11b Wi-Fi card inserted in the SD/SDIO slot, remove it before preceding further.

2. Unscrew the cap at the top of the stylus and use the pointed tip of the cap to press the reset button. The reset button is located inside of a small opening on the back of the V36 next to the battery compartment.

Restoring Factory Defaults (V36 cold boot)

In some cases, you may need to restore your V36 to the factory default settings by clearing the memory (RAM) from your V36. For example, you should clear the memory:
• When your V36 does not respond after being reset (warm boot described on the previous page).
• When you forget your password. Clearing the memory means all data you have entered in RAM, including all files, system settings, and additional programs you have installed, will be erased. (Programs installed to ROM at the factory are not affected.)
CAUTION:
• To ensure the integrity of your data should it be necessary to clear the memory, you are advised to regularly back up to your Pocket PC (using ActiveSync), or to an optional SD card (using the backup application).
• Do not move the battery switch unless it is necessary.

To clear the memory from your V36, do the following:
1. Make sure that the V36 is turned off, disconnect all cables (including the AC adapter) and if applicable, remove the SD Memory card or 802.11b SDIO card from your V36. Then, slide battery lock switch to the unlocked (down) position. See the illustration below.
2. Remove the battery compartment cover.
3. Unscrew the cap at the top of the stylus.
4. Use the pointed tip of the cap to slide the battery switch to the OFF (left) position, then ON (right) again.
5. Replace the battery compartment cover.
6. Side battery lock switch to the locked (up) position. The Notification indicator will flash red for approximately 30 seconds, and then your V36 will automatically turn on and display the Welcome Wizard screen.


NOTE: If the battery runs completely out of power and is not re-charged in time, the memory of your V36 will be cleared.

ViewSonic V37 hard reset

Resetting your V37

CAUTION: Resetting will cause unsaved data to be lost.

Resetting your V37 is similar to restarting your PC. It restarts the operating system, but you will lose any unsaved data.

Occasionally, you may need to reset your V37. For example, you should reset your V37:

• After you restore data from your PC.

• When your V37 stops responding. (In other words, it appears to be "frozen" or "locked up.")

Follow this procedure to reset your V37:
1 Remove the memory card (if installed).

2 Unscrew the cap at the top of the stylus. Use the pointed tip of the cap to press the reset button on the side of your V37.

Restoring V37 Factory Defaults

In some cases, you may need to restore your V37 to the factory default settings by clearing the memory (RAM) from your V37. For example, you should clear the memory:

• When your V37 does not respond after being reset.

• When you forget your password.

Clearing the memory means all data you have entered in RAM, including all files, system settings, and additional programs you have installed, will be erased.

(Programs installed to ROM at the factory are not affected.)

CAUTION:
• To ensure the integrity of your data should it be necessary to clear the memory, you are

advised to regularly back up to your PC (using ActiveSync), or to an optional SD card (using the backup application).

• Do not push the battery switch unless it is necessary.

Follow this procedure to clear the memory from your V37:

1. Disconnect all cables, including the AC adapter; from your V37.
2. Unscrew the cap at the top of the stylus. Use the pointed tip of the cap to push the battery switch to the OFF (up) position.


3. Wait for three (3) minutes then push the battery switch to the ON (down) position.
4. The Notification indicator will flash red for approximately 30 seconds, and then your V37 will automatically turn on and display the Welcome Wizard screen.

NOTE: If the battery runs completely out of power and is not re-charged in time, the memory of your V37 will be cleared.

Soft Reset ViewSonic ViewPad 100

Should your ViewPad 100 fail to respond. it may be restarted without turning off the power.

1. Unscrew your stylus then use the reset pointer to press the reset button.

2. The reset button is on the top of your ViewPad 100. See Figure.

Press the reset button to restart your ViewPad 100.

Hard Reset ViewSonic ViewPad 100

A hard reset may be required on rare occasions if your View Pad 100 completely locks up and the soft restart described above does not help.

1. Remove the back cover panel using a small Phillips-head screwdriver or the Phillips-head attached to your stylus.
2. Push the restart button indicated by the arrow in Figure
3. Carefully replace the cover and secure with the small Phillips-head screw.

Vodafone Smart 2 hard reset

Vodafone Smart 2 Android hard reset using key combo

reset Vodafone Smart 2 unlock pattern
Reset  Vodafone Smart II
All data will be lost! Backup everything!
Turn off your phone. Hold VOLUME UP + power on/off key at same time until the phone switching ON, when you feel it vibrates release only POWER but keep pressing Volume UP key. A green droid should come up. Release volume button.
Select factory reset /wipe data with volume down key and press HOME to confirm.
Choose reboot system now.


unlock Vodafone Smart 2
You have to reflash Vodafone Smart II firmware upgrade
TCT Alcatel Recovery v1.0.0.0
TCT FOTA Recovery Utility
- reboot system now - restart phone
- apply update from sdcard - upgrade firmware
- wipe userdata factory reset - wipe data
- wipe cache partition

ALL User phone data: contacts, photos, messages and files, downloaded applications like Java games will be lost permanently.
Factory data reset
Erase all of your personal data from internal phone storage, including information about your Google Account, any other accounts, your system and application settings, and any downloaded applications. You can also mark the Erase SD card check box to erase all the data on your microSD card, such as music or photos. If you reset the phone in this way, you’re
prompted to re-enter the same kind of information as when you first started Android.

or

Go to Settings >Privacy > Factory Data reset > Reset phone > Erase everything.

Vodafone V1640 hard reset

Vodafone V1640 Soft reset

Resetting Your Pocket PC Phone

Occasionally you may need to reset your Pocket PC Phone. A normal (or soft) reset of your device clears all active program memory and
shuts down all active programs. This can be useful when the device is running slower than normal, or a program is not performing properly. A
soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will
be lost.
You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a
system problem. After a hard reset, the device is restored to its default settings—the way it was when you first purchased it and turned it
on. Any programs you installed, data you entered, and settings you customized on the device will be lost. Only Windows Mobile software
and other pre-installed programs will remain.

Vodafone V1640 Soft reset

To perform a Vodafone V1640 soft reset

• Use the stylus to lightly press and hold the RESET button on the left side of your device.
The device restarts and displays the Today screen.

Warning! Always turn off your device before performing a soft reset or installing/replacing the battery and SIM card.

Vodafone V1640 Hard reset

To perform a Vodafone V1640 hard reset

Press and hold both SOFT KEYS shown enclosed by circles in the picture below.

Keep these keys pressed, and at the same time, use the stylus to lightly press and hold the RESET button on the left side of your device.

Press either 0 to restore to factory default or X to exit the hard reset process.

Vodafone V1605 hard reset

Resetting Your Pocket PC Phone

Occasionally, you may need to reset your device. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost. You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings — the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile software and other pre-installed programs will remain.

To perform a soft reset

• Use the stylus to lightly press and hold the RESET button onthe bottom of your device. Your device restarts and displays the Today screen.

To perform a hard reset

Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device.

Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.

Vodafone 858 Smart hard reset

Vodafone 858 Smart  hard reset using buttons

Press and hold VOLUME UP+ POWER ON Vodafone 858 Smart to get into recovery menu. Select Factory reset with Volume down button. Confirm with power key. All of your data will be lost!

Back up your data first!

Resetting Your Mobile Phone using menu

Restoring Factory Data
If you reset your phone to the settings that were configured at the factory, all of your personal data
stored on the phone, including information about your Google Account, any other accounts, your
system and application settings, and any applications you have downloaded will be erased. Resetting
the phone does not erase any system software updates you have downloaded or any files on your
microSD card, such as music clips or photos.

1. On the Settings screen, touch Privacy > Factory data reset.
2. When prompted, touch Reset phone, and then touch Erase everything. The mobile phone resets
the settings to the original factory settings, and then restarts.

Backing Up My Data
You can use your Google account to back up your mobile phone’s settings to Google servers. If you
replace your mobile phone, the settings you have backed up will be transferred to the new mobile
phone the first time you sign in to your Google account.
1. On the Settings screen, touch Privacy.
2. Select the Back up my data check box.

Vodafone 858 Smart  bootloader mode

Press and hold END CALL + VOLUME DOWN+ POWER ON Vodafone 858 Smart to get into bootloader mode
If it doesn't work try End + Vol UP + Power on.

Vodafone VPx hard reset

Resetting the Vodafone VPx
You can perform a soft reset or a full reset. During a soft reset, the device is restarted and
only some data in opened programs may be lost. However, a full reset turns the battery off,
returns the device to its original factory settings, and deletes all programs, files, contacts and
other information you have saved to the device. Therefore, it is extremely important to back up
data to a storage card or your computer on a regular basis in the event that a full reset has to
be performed.

To perform a soft reset:

If your Vodafone VPx responds slowly, stops responding, or freezes, you can soft reset it.
A soft reset causes the Vodafone VPx to restart and re-adjust memory allocation. Unsaved
data in any opened applications may be lost. Use the stylus to press and hold the Reset button,
as shown bellow.

To perform a full reset:

A full device reset clears memory, deletes all data and restores the Vodafone VPx to itsdefault settings.

Programs installed at the factory remain,
erasing all data that you have created and programs you
have installed.
Press and hold the power button, and then use the stylus to
press the soft reset button at the same time. Be sure you
have backed up all your data in a SD card or on your PC
before performing a full reset.

Vodafone 555 hard reset

Vodafone 555 hard reset

Try G key + Power on the device.

Select to restore factory settings.
All user data, files and downloaded applications will be lost permanently.
You may also realize factory reset using hard keys: hold down key G* and press POWER key at the same time.

or

Press Menu
Scroll to Settings, then press Select
Scroll to Factory reset, then press OK
Press Yes.

Vodafone 345 hard reset

Vodafone 345 hard reset

Press Menu
Scroll to Settings, then press Select
Scroll to Factory reset, then press OK
Press Yes.

Vodafone 845 hard reset

Vodafone 845 hard reset

Turn off your phone. Press and hold Volume UP + Call + Power ON your 845. Use middle optical touchpad in the recovery menu to select items.

or

Press the MENU key, then Touch Settings, Scroll to and touch Privacy, Touch Factory data reset
Touch Reset phone
Touch Erase everything.

Vodafone 547 hard reset

Vodafone 547 hard reset

Touch the Menu key, Touch Settings, Touch Restore factory settings
Enter the phone code, touch OK.

Orange SPV M650 hard reset

Resetting Your Pocket PC Phone

Occasionally, you may need to reset your device. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost.

You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings — the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile software and other pre-installed programs will remain.

To perform a soft reset

• Use the stylus to press the RESET button found on the lower left side of your device. Your device restarts and displays the Today screen.

To perform a Orange SPV M650 hard reset

1. Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the lower left side of your device.
2. Release the stylus, but continue pressing the two soft key buttons. Release them only when you see the following message on your device screen: “Press Send to restore manufacturer default, or press other keys to cancel.“
3. Press on your device. Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.

Vodafone 1230 hard reset

Vodafone 1230 hard reset

Vodafone 1230 hard reset solution Press and hold both Home + right button (above the key) + Space + Power

or

Settings > Reset to Factory Settings
Select Reset To Factory Settings. Follow the instructions displayed on the screen to
reset the phone. The phone will restart after reset.
Warning! After you reset your phone to factory settings, all the information and settings you have
saved on your phone will be lost.

Warning: This will permanently erase all personal data from the device.

Press "Start"
Scroll to Settings, press the Centre key
Scroll to More, press the Centre key
Scroll to More, press the Centre key
Scroll to More, press the Centre key
Scroll to Reset To Factory Settings, press the Centre key
Enter 1234, press "Yes".

Vodafone v1240 hard reset

Vodafone v1240 hard reset

Power off phone. Press both LEFT and RIGHT SOFT keys, then press power for 3 sec, press 0 to restore

Vodafone v1620 hard reset

Resetting Your Pocket PC Phone

(Vodafone v1620, Vodafone v1620, i-Mate Jam, Vodafone v1620, O2 XDA-II Mini, T-Mobile MDA Compact, Orange SPV M500
Vodafone v1620/VPA III)

You can perform a soft reset or a full reset. During a soft reset, the device is restarted and only some data in opened programs may be lost. However, a full reset turns the battery off, returns the device to its original factory settings, and deletes all programs, files, contacts and other information you have saved to the device. Therefore, it is extremely important to back up data to a storage card or your computer on a regular basis in the event that a full reset has to be performed.

To perform a soft reset
If your Pocket PC Phone responds slowly, stops responding, or freezes, you can soft reset it. A soft reset causes the Pocket PC Phone to restart and re-adjust memory allocation. Unsaved data in any opened applications may be lost. Use the stylus to press and hold the Reset button, as shown below.

To perform a T-Mobile Compact full reset

A full device reset clears memory, deletes all data and restores the Pocket PC Phone to its default settings. Programs installed at the factory remain, erasing all data that you have created and programs you have installed. Press and hold the power button, and then use the stylus to press the soft reset button at the same time. Be sure you have backed up all your data in a SD card or on your PC before performing a full reset.

Vodafone v1520 hard reset

Resetting Your 1520 Pocket PC Phone

Warning, this will permanently erase all personal data from the phone.

Push the stylus in the "reset" hole on the left hand side of the phone and press the "power" key.

Vodafone VDA hard reset

Vodafone VDA hard reset

Power off phone. Press both LEFT and RIGHT SOFT keys, then press power for 3 sec, press 0 to restore

Vodafone VDA II hard reset

Vodafone VDA II hard reset

First, turn off the phone.

At the same time, press & hold the Left and Right Soft Key, (keep pressing 2 keys) + press the Power button once for 2 sec.