Eten DX900 hard reset

Eten DX900 Soft Reset

Reset method: Press the RESET button of Pocket PC with the tip of the stylus.

Result: In a moment, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This will retain the Microsoft Windows, factory pre-installed applications, and user's input data, newly installed programs, and user custom settings

Eten DX900 Default Settings procedures when touch screen is functoinal

If the Pocket PC is unable to maintain normal operation, but the touch screen is functional
Tap > Programs > Utilities > Default Settings
please select the data input block on the right, and enter the authorized code in the block to the left. Then tap OK.

Result: This will retain only the Microsoft Windows, and factory pre-installed applications. Other settings such as user's input data, newly
installed programs, and user custom settings will all be cleared.

Eten DX900 Hard reset

Eten DX900 Clean Boot

Press and hold both POWER button and RESETbutton for a while, then release them simultaneously. Wait for a few seconds until
the screen wakes up displaying the model name, firmware version and firmware builddate of your device, instantly press and
hold. Continue pressing and release it when you see an inquiry box shown on the screen.


Clean Boot

Eten DX900 Cold boot method:

Press and hold both POWER button and RESET button for a while, then release them simultaneously. Wait for a few seconds until the screen wakes up displaying the model name, firmware version and firmware build date of your device, instantly press and hold .

Appropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no
response, or if the screen is frozen.
Before executing the preceding 'Cold boot method', please carefully consider the following instructions and then decide on the cold boot
method.

1. After a cold boot is performed, if no buttons are pressed, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This is identical to the reset result.
2. If a previous reset has already been attempted but the Pocket PC is still unable to maintain normal operation, consider the following solution:

Press and hold both POWER button and RESET button for a while, then release them simultaneously.

Wait for a few seconds until the screen wakes up displaying the model name, firmware version and firmware build date of your device, instantly
press and hold . Continue pressing a and release it when you see this message shown on the screen.

The operation 'Erase all data and load default?' will delete all the data you stored on your device and restore it back to factory default settings.

If you press upon seeing the line 'Yes [press CAMERA button]' at the
bottom of screen, all the data you stored, programs you installed and
customized settings you made on this device will all be cleared. Follow the
onscreen instructions to complete the resetting after the device reboots.
Without your confirmation of this operation as pressing , the device
will cancel this procedure after a few seconds idle.


Caution
1. After performing a cold boot, the system will retain Microsoft Windows and
pre-installed programs. If you answer 'Yes' to the question displayed after a
cold boot, other items such as the user's input data, newly installed programs
and user settings will be lost.
2. There are two ways to retain your data, loaded default and registry:
1 Perform a Reset.
2. Performing a Cold Boot, and answer 'No' when the above question
displays.

Eten G500 hard reset

Eten G500 hard reset and soft reset

Restarting the Pocket PC

Soft reset

Reset: Use the stylus to press the 'Reset Button' on the side of the Pocket PC.

1 Camcorder

2 Volume control key

3 Voice Commander

4 Reset button

5 Earphone and microphone

Power Button + Reset Button = cold boot - Hard reset

Cold Boot: Press and hold the 'Power Button' with one hand, and use the stylus tip to press the 'Reset Button' with the other hand. Release the
'Power Button' and the 'Reset Button' at the same time. Wait for the Pocket PC to restart and follow the instructions on the screen to complete screen alignment. Tap on the center of the cross (+) continuously and follow the screen instructions to complete the operation.

After performing a cold boot, the system will ask two questions. Please refer to the following instructions before carrying out carefully.
1. Erase all data and load default? (The default is “No.” If Yes or No was not selected, after a few seconds the system will automatically execute the default No.) If you long press Left Soft-Key for a few seconds to select “Yes,” then the system will
erase all data and load default. After your Pocket PC restarts, follow the instructions on the screen to complete.

2. Delete registry only? (The default is “No.” If Yes or No was not selected, after a few seconds the system will automatically execute the default No.) If you long press Left Soft-Key for a few seconds to select “Yes,” then the system will delete registry only.

Caution!
1. After performing a cold boot, the system will retain Microsoft Windows and pre-installed programs. If you answer “Yes” to the two questions displayed after a cold boot, other items such as the user’s input data, newly installed programs and user settings will be lost.
2. There are two ways to retain your data, loaded default and registry:
Perform a Reset.
Performing a Cold Boot, and answer “No” when the above two questions display.

Caution!

1. After performing a cold boot, the system will retain Microsoft Windows, pre-installed programs and files saved in the Flash Disk. Other items such as the user's input data, newly installed programs and user settings will be lost.
2. After performing a system reset, the above-mentioned data will be retained.

Eten Glofiish M700 hard reset

Restarting the Pocket PC

Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen.

For your consideration, factoring into your safety and convenience, please refer to the following instructions in order:

Reset - Soft reset

Press the “Reset Button” of Pocket PC with the tip of the stylus.

Default Settings procedures

If the touch screen is functional, please tap,Programs, Utilities, and then Default Settings.

	1. If this application is inadvertently accessed, please select the [X] to the upper right of the screen to exit, the system will not be affected. 2. If you are certain that you wish to perform this action, please select the data input block on the right, and enter the authorized code in the block to the left. Then tap the OK button.
Appropriate situation: If the Pocket PC is unable to maintain normal operation, but the touch screen is functional. Please refer to the instructions in this section to troubleshoot. Result: This will retain only the Microsoft Windows, and factory pre-installed applications. Other settings such as user’s input data, newly installed programs, and user custom settings will all be cleared.

Clean Boot - Hard reset

Hold the “Power Button” and press once on the “Reset Button” with the tip of the stylus, and release both buttons simultaneously. Next, continually hold the End Button until the system inquiry screen is displayed, then release the End Button. Answer the question(s).

Cold boot method: Hold the “Power Button” of the Pocket PC with one hand while holding the stylus tip to push in the “Reset Button” with the other. Simultaneously release both the “Power Button” and “Reset Button”.

Appropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no response, or if the screen is frozen.

|Before executing the preceding “Cold boot method”, please carefully consider the following instructions and then decide on the cold boot method.

1. After a cold boot is performed, if no buttons are pressed, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This is identical to the reset result.
2. If a previous reset has already been attempted but the Pocket PC is still unable to maintain normal operation, consider the following solution:
After cold boot, hold the End Button on the bottom right of Pocket PC until the system inquiry screen is shown, and then release the End Button. Next, please read thoroughly through the instructions on cold booting before continuing carefully.

Perform cold boot and hold the End Button . The system will display a two question inquiry screen. Please refer to the following instructions before careful consideration.

1. Erase all data and load default? (The default is “No.” If Yes or No was not selected, after a few seconds the system will automatically execute the default No.) If you long press Left Soft-Key for a few seconds to select “Yes,” then the system will erase all data and load default. After your Pocket PC restarts, follow the instructions on the screen to complete.

Delete registry only? (The default is “No.” If Yes or No was not selected, after a few seconds the system will automatically execute the default No.) If you long press Left Soft-Key for a few seconds to select “Yes,” then the system will delete registry only.

Eten Glofiish M750 hard reset

Restarting the Pocket PC
Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen.
For your consideration, factoring into your safety and convenience, please refer to the following instructions in order:

1. Reset Press the “Reset Button” of Pocket PC with the tip of the stylus.

2. Default Settings procedures If the touch screen is functional, please tap , Programs, Utilities, and then Default Settings.

3. Clean Boot Hold the “Power Button” and press once on the “Reset Button” with the tip of the stylus, and
release both buttons simultaneously. Next, continually hold the End Button until the system inquiry screen is displayed, then release
the End Button. Press Soft-Key to answer the question.

Eten M750 Reset

Reset method: Press the “Reset Button” of Pocket PC with the tip of the stylus.

Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen.
Result: In a moment, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This will retain
the Microsoft Windows, factory pre-installed applications, user’s input data, newly installed programs, and user custom settings.

Eten M750 Default Settings

Tap , Programs, Utilities, and then Default Settings

1. If this application is inadvertently accessed, please select the to the upper right of the screen to exit,
the system will not be affected.
2. If you are certain that you wish to perform this action, please select the data input block on the right,
and enter the authorized code in the block to the left. Then tap the OK button.

Appropriate situation: If the Pocket PC is unable to maintain normal operation, but the touch screen is functional. Please refer to the
instructions in this section to troubleshoot.
Result: This will retain only the Microsoft Windows, and factory pre-installed applications. Other settings such as user’s input data, newly
installed programs, and user custom settings will all be cleared.

Cold boot method: Hold the “Power Button” of the Pocket PC with one hand while holding the stylus tip to push in the “Reset Button” with the

other. Simultaneously release both the “Power Button” and “Reset Button”.

Appropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no
response, or if the screen is frozen. Before executing the preceding “Cold boot method”, please carefully
consider the following instructions and then decide on the cold boot
method.
1. After a cold boot is performed, if no buttons are pressed, when Pocket PC automatically completes the system startup process, the last display will be
the Today screen. This is identical to the reset result.
2. If a previous reset has already been attempted but the Pocket PC is still unable to maintain normal operation, consider the following solution:
After cold boot, hold the End Button on the bottom right of Pocket PC until the system inquiry screen is shown, and then release the End
Button. Next, please read thoroughly through the instructions on cold booting before continuing carefully.

Perform cold boot and hold the End Button . Please refer to the following instructions before careful consideration.

Erase all data and load default? The default is “No.” If Yes or No was not
selected, after a few seconds the system will automatically execute the default No.

If you long press Left Soft-Key for a few seconds to select “Yes,” then the system will
erase all data and load default. After your Pocket PC restarts, follow the instructions on
the screen to complete.

Caution!
1. After performing a cold boot, the system will retain Microsoft Windows and pre-installed programs. If you answer “Yes” to the question displayed
after a cold boot, other items such as the user’s input data, newly installed programs and user settings will be lost.
2. There are two ways to retain your data, loaded default and registry:
- Perform a Reset.

Eten Glofiish M800 hard reset

Eten M800 hard reset soft reset

Restarting the Pocket PC

Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen.

For your consideration, factoring into your safety and convenience, please refer to the following instructions in order:

Eten Glofiish M800 Clean Boot - Soft reset

Press the “Reset Button” of Pocket PC with the tip of the stylus.

Default Settings procedures

If the touch screen is functional, please tap,Programs, Utilities, and then Default Settings.

	1. If this application is inadvertently accessed, please select the [X] to the upper right of the screen to exit, the system will not be affected. 2. If you are certain that you wish to perform this action, please select the data input block on the right, and enter the authorized code in the block to the left. Then tap the OK button.
Appropriate situation: If the Pocket PC is unable to maintain normal operation, but the touch screen is functional. Please refer to the instructions in this section to troubleshoot. Result: This will retain only the Microsoft Windows, and factory pre-installed applications. Other settings such as user’s input data, newly installed programs, and user custom settings will all be cleared.

Eten Glofiish M800 Clean Boot - Hard reset

Cold boot method: Hold the “Power Button” of the Pocket PC with one
hand while holding the stylus tip to push in the “Reset Button” with the
other. Simultaneously release both the “Power Button” and “Reset Button”.

Cold boot method: Hold the “Power Button” of the Pocket PC with one hand while holding the stylus tip to push in the “Reset Button” with the other. Simultaneously release both the “Power Button” and “Reset Button”.

Appropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no response, or if the screen is frozen.

|Before executing the preceding “Cold boot method”, please carefully consider the following instructions and then decide on the cold boot method.

1. After a cold boot is performed, if no buttons are pressed, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This is identical to the reset result.
2. If a previous reset has already been attempted but the Pocket PC is still unable to maintain normal operation, consider the following solution:
After cold boot, hold the End Button on the bottom right of Pocket PC until the system inquiry screen is shown, and then release the End Button. Next, please read thoroughly through the instructions on cold booting before continuing carefully.

Perform cold boot and hold the End Button . The system will display a two question inquiry screen. Please refer to the following instructions before careful consideration.

1. Erase all data and load default? (The default is “No.” If Yes or No was not selected, after a few seconds the system will automatically execute the default No.) If you long press Left Soft-Key for a few seconds to select “Yes,” then the system will erase all data and load default. After your Pocket PC restarts, follow the instructions on the screen to complete.

Eten Glofiish M810 hard reset

Restarting the Pocket PC
Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen.
For your consideration, factoring into your safety and convenience, please refer to the following instructions in order:

1. Reset Press the “Reset Button” of Pocket PC with the tip of the stylus.

2. Default Settings procedures If the touch screen is functional, please tap , Programs, Utilities, and then Default Settings.

3. Clean Boot Hold the “Power Button” and press once on the “Reset Button” with the tip of the stylus, and
release both buttons simultaneously. Next, continually hold the End Button  until the system inquiry screen is displayed, then release
the End Button. Press Soft-Key to answer the question.

Eten M810 Reset

Reset method: Press the “Reset Button” of Pocket PC with the tip of the stylus.

Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen.
Result: In a moment, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This will retain
the Microsoft Windows, factory pre-installed applications, user’s input data, newly installed programs, and user custom settings.

Eten M810 Default Settings

Tap , Programs, Utilities, and then Default Settings

1. If this application is inadvertently accessed, please select the  to the upper right of the screen to exit,
the system will not be affected.
2. If you are certain that you wish to perform this action, please select the data input block on the right,
and enter the authorized code in the block to the left. Then tap the OK button.

Appropriate situation: If the Pocket PC is unable to maintain normal operation, but the touch screen is functional. Please refer to the
instructions in this section to troubleshoot.
Result: This will retain only the Microsoft Windows, and factory pre-installed applications. Other settings such as user’s input data, newly
installed programs, and user custom settings will all be cleared.

Cold boot method: Hold the “Power Button” of the Pocket PC with one hand while holding the stylus tip to push in the “Reset Button” with the

other. Simultaneously release both the “Power Button” and “Reset Button”.

Appropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no
response, or if the screen is frozen. Before executing the preceding “Cold boot method”, please carefully
consider the following instructions and then decide on the cold boot
method.
1. After a cold boot is performed, if no buttons are pressed, when Pocket PC automatically completes the system startup process, the last display will be
the Today screen. This is identical to the reset result.
2. If a previous reset has already been attempted but the Pocket PC is still unable to maintain normal operation, consider the following solution:
After cold boot, hold the End Button on the bottom right of Pocket PC until the system inquiry screen is shown, and then release the End
Button. Next, please read thoroughly through the instructions on cold booting before continuing carefully.

Perform cold boot and hold the End Button . Please refer to the following instructions before careful consideration.

Erase all data and load default? The default is “No.” If Yes or No was not
selected, after a few seconds the system will automatically execute the default No.

If you long press Left Soft-Key for a few seconds to select “Yes,” then the system will
erase all data and load default. After your Pocket PC restarts, follow the instructions on
the screen to complete.

Caution!
1. After performing a cold boot, the system will retain Microsoft Windows and pre-installed programs. If you answer “Yes” to the question displayed
after a cold boot, other items such as the user’s input data, newly installed programs and user settings will be lost.
2. There are two ways to retain your data, loaded default and registry:
- Perform a Reset.
- Performing a Cold Boot, and answer “No” when the above question displays.

Eten Glofiish X500 hard reset

E-ten X500 Soft reset

Restarting the Pocket PC

Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen.
For your consideration, factoring into your safety and convenience, please refer to the following instructions in order:

1. Reset Press the 'Reset Button' of Pocket PC with the tip of the stylus.

E-ten X500 Hard reset

2. Default Settings procedures
If the touch screen is functional, please tap Programs, Utilities, and then Default Settings.

3. Clean Boot

Hold the 'Power Button' and press once on the 'Reset Button' with the tip of the stylus, and release both buttons simultaneously. Next,
continually hold the End Button until the system inquiry screen is displayed, then release the End Button. Answer the question(s).

Reset

Reset method: Press the 'Reset Button' of Pocket PC with the tip of the stylus.




Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen.
Result: In a moment, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This will retain the Microsoft Windows, factory pre-installed applications, user's input data, newly installed programs, and user custom settings.

Default Settings

Tap Programs, Utilities, and then Default Settings.



1. If this application is inadvertently
accessed, please select the to the upper right of the screen to exit, the system will not be affected.
2. If you are certain that you wish to perform this action, please select the data input block on the right, and enter the authorized code in the block to the left. Then tap the OK button.

Appropriate situation: If the Pocket PC is unable to maintain normal operation, but the touch screen is functional. Please refer to the instructions in this section to troubleshoot.
Result: This will retain only the Microsoft Windows, and factory pre-installed applications. Other settings such as user's input data, newly installed programs, and user custom settings will all be cleared.

E-ten X500 Clean Boot

Cold boot method: Hold the 'Power Button' of the Pocket PC with one hand while holding the stylus tip to push in the 'Reset Button' with the other. Simultaneously release both the 'Power Button' and 'Reset Button'.



Appropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no response, or if the screen is frozen.

Before executing the preceding 'Cold boot method', please carefully consider the following instructions and then decide on the cold boot method.
1. After a cold boot is performed, if no buttons are pressed, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This is identical to the reset result.
2. If a previous reset has already been attempted but the Pocket PC is still unable to maintain normal operation, consider the following solution:
After cold boot, hold the End Button on the bottom right of Pocket PC until the system inquiry screen is shown, and then release the End Button. Next, please read thoroughly through the instructions on cold booting before continuing carefully.

Perform cold boot and hold the End Button Please refer to the following instructions before careful consideration.



Erase all data and load default?
The default is 'No.' If Yes or No was not selected, after a few seconds the system will automatically execute the default No.

If you long press Left Soft-Key for a few seconds to select 'Yes,' then the system will erase all data and load default. After your Pocket PC restarts, follow the instructions on the screen to complete.

Caution!
1. After performing a cold boot, the system will retain Microsoft Windows and pre-installed programs. If you answer 'Yes' to the two questions displayed after a cold boot, other items such as the user's input data, newly installed programs and user settings will be lost.
2. There are two ways to retain your data, loaded default and registry:
Perform a Reset.
Performing a Cold Boot, and answer 'No' when the above question displays.