Fujitsu-Siemens Pocket LOOX 600 hard reset

Master reset Fujitsu-Siemens Pocket LOOX 600

Resetting is an operation that is necessary in such cases as system and
application encounter critical errors and stop respond to input. There are two
types of resets.

• Normal resets
• Full resets

Fujitsu-Siemens Pocket LOOX 600 Soft reset Fujitsu-Siemens Pocket LOOX 600 Normal Resets

A normal reset is equivalent to Restart for a computer. This operation is necessary
when there is trouble such as a program that stops responding.
When you execute a normal reset, the current data will lost.
To execute a normal reset, press the reset button on the rear of the device itself with
the extendable stylus pen as shown in the figure.

Important
Always press the reset switch with this device’s extendable stylus pen. Using a ball point pen
or the like can damage this device.

Fujitsu-Siemens Pocket LOOX 600 Full Resets

A full reset is equivalent to recovery for a computer and returns this device to its factory
status. This operation is necessary in such unlikely cases as the system becoming
unable to start.
When you execute a full reset, the following data is lost. Make sure you back up your
data before peforming this step.

• Data being operated on
• Data created by the user
• Added programs

To execute a full reset, operate the battery switch as follows.

1. Open the slide cover.
2. Using the extendable stylus pen, (1) Slide the battery switch to the Off side,
then (2) Slide it back to the On side.

3. Close the slide cover.
4. Read “Switching on the Power for the First Time

Preparing to Use this Device for the First Time

When using this device for the first time, switch the battery switch On and supply
power to the memory.
1. Use the extendable stylus pen to slide open the battery cover.

2. Slide the slide switch to the ON side.

3. Close the slide cover.

Normal Method for Switching on the Power

1. Press the power button.