Gigabyte S1080 tablet hard reset

Gigabyte S1080 slate hard reset using GIGABYTE System Recovery

GIGABYTE Smart Recovery reset s1081
If the machine you purchase already has operating system built-in, you can restore the system back to factory default by using GIGABYTE Smart Recovery. Please be noted that the GIGABYTE Smart Recovery interface, icons, utilities and software versions may vary based on the purchased models. Please operate GIGABYTE Smart Recovery according to the default built-in version.

Please be noted that personal data will be lost after recovery, do remember to backup any data before using this function.

Press and release the Power button to turn on the operation system. Press Volume DOWN "-" to enter into GIGABYTE System Recovery.
Use Directing Hot Key located the front right side to operate GIGABYTE Smart Recovery.

Entering Gigabyte S1080 BIOS

Press and release the Power button to turn on the operation system. Press Volume UP "+" to enter into GIGABYTE BIOS Setup
Utility. USB Keyboard is recomended to use for setting up BIOS functions under GIGABYTE BIOS Setup Utility.

Gigabyte S1080 tablet soft reset - restarting your slate tablet

Press both: "Left click + Right click of mouse + Directing Hot Key" to operate as the function of "Ctrl+Alt+Del".

Gigabyte Panda GSmart M3447 hard reset

How to hard reset Gigabyte gSmart M3447 Panda hard reset: Select Menu > Settings >Restore Factory settings > Input password 0000 > Yes

Gigabyte gSmart MS800 hard reset

Gigabyte gSmart MS800 soft reset

Press the button with stylus to soft reset your device.

Gigabyte gSmart MS800 hard reset

If the system still lags after rebooting, you will need to clean boot the device. To clean boot,
press and hold Camera key and Power Key at the same time for about 3 seconds and then
release. Your device will reset to factory defaults and reboot.

Note: When you perform a clean boot on this device, all your personalized settings,
information, and programs installed will be removed. The system will reset to factory defaults.

Gigabyte gSmart MS820 hard reset

Gigabyte gSmart  MS820 hard reset

Gigabyte gSmart MS820 ROM upgrade

Copy downloaded (from gigabyte website) Image files, unzip it to memory card.

Please make sure the battery is over 60% full before upgrading. Place the Mini/Micro SD card into the phone and turn off the phone.

Then press and hold the down Volume Key and press the Power Button at the same time, until the “IMAGE UTILITY” show up,

release all buttons and it will start installing.

(1) Blue Light: Reading, from Mini/Micro SD card to SDRAM.

(2) Orange Light: Writing, from SDRAM to Flash.

After entering Download mode, plug in the charger NOW to ensure upgrade stability

The upgrade takes about 20 minutes. Upon completion, please follow the instruction –

“Please Remove Battery” to remove the battery for 1~2 seconds, then put the battery back and reboot the phone

Gigabyte GSmart MW702 hard reset

Gigabyte GSmart  MW702 hard reset

Gigabyte GSmart MW702 ROM upgrade

Copy downloaded (from gigabyte website) Image files, unzip it to memory card.

Please make sure the battery is over 60% full before upgrading. Place the Mini/Micro SD card into the phone and turn off the phone.

Then press and hold the down Volume Key and press the Power Button at the same time, until the “IMAGE UTILITY” show up,

release all buttons and it will start installing.

(1) Blue Light: Reading, from Mini/Micro SD card to SDRAM.

(2) Orange Light: Writing, from SDRAM to Flash.

After entering Download mode, plug in the charger NOW to ensure upgrade stability

The upgrade takes about 20 minutes. Upon completion, please follow the instruction –

“Please Remove Battery” to remove the battery for 1~2 seconds, then put the battery back and reboot the phone

Gigabyte gSmart  MW702 soft reset

Reset hole

Use something shaped like a needle or paper clip to insert it to reset your phone.

Gigabyte gSmart  MW702 hard reset with key combo

1. Power off Gigabyte gSmart  MW702.
2. Press and hold Camera key + Power ON key for about 3 sec.
3. Charge your MW702, plug in your charger and take out battery then reinsert it.
4. Power ON your device and you can calibrate your screen etc.

Gigabyte G1355 hard reset

Gigabyte gSmart  G1355 hard reset

To hard reset using buttons try the Volume down + power on combo. Select wipe data / Factory reset with volume key and select by pressing power key.  Not tested yet, pls leave comment.

G1355 ROM upgrade hard reset

Gigabyte gSmart G1355 ROM upgrade GSmart _G1355_V1.13.1_EEU

Copy downloaded (from gigabyte website) files, update1.zip and configure to memory card root folder.

Please make sure the battery is over 99% full before upgrading. Place the Micro SD card into the phone and turn off the phone.

Then press and hold the Volume UP Key and press the Power Button at the same time, until the “android figure” with a yellow exclamation mark show up, release all buttons and it will start installing.

Device will reboot automatically. Do not do anything until you see this: then press power button to reboot



or reset Gigabyte G1355 cell phone via menu options
1. From the Home screen, touch the Menu Key .
2. Touch Settings > Privacy > Factory data reset.
3. Read the warning and touch Reset phone.
4. Touch Erase everything.

Gigabyte G1345 hard reset

Gigabyte gSmart  G1345 hard reset G1315 G1310

To hard reset using buttons try the Volume down (Camera) + power on combo. Select wipe data / Factory reset with volume key and select by pressing power key.  Not tested yet, pls leave comment.

G1345 ROM upgrade hard reset

Gigabyte gSmart G1345 ROM upgrade GSmart _G1345_V1.xx.x_EEU

Copy downloaded (from gigabyte website) files, update1.zip and configure to memory card root folder.

Please make sure the battery is over 99% full before upgrading. Place the Micro SD card into the phone and turn off the phone.

Then press and hold the Camera key and press the Power Button at the same time, until the “android figure” with a yellow exclamation mark show up, release camera button and it will start installing.

Device will automatically reboot. Do not do anything until you see this: then reboot by using camera key.

System update OK Radio update OK and Bootloader update OK

or reset Gigabyte G1345 cell phone via menu options

1. From the Home screen, touch the Menu Key .
2. Touch Settings > Privacy > Factory data reset.
3. Read the warning and touch Reset phone.
4. Touch Erase everything.

Gigabyte gSmart S1200 hard reset

GigaByte gSmart S1200 soft reset

Remove the battery cover and the stylus. Push the battery cover upwards, and then, remove it. Then you can find the reset button. Press it to reset your phone.

GigaByte gSmart S1200 hard reset

Restore to Default

Tap Start > Settings > System tab > Restore to Default. Input the 4-digit password in the blank, and then, tap “Restore” to restore to the default setting.

GigaByte gSmart S1200 hard reset with keys

How do I process GigaByte gSmart S1200 hard reset to restore to Default by using hard keys?

Press Power Key, and then, your device will be turned on. When the boot screen with GSmart
appears, press Side Key (Volume Up) and Call Key immediately. When you press Side Key (Volume Up)
and Call Key to process Restore to Default, LED Indicator will turn different colors.

Gigabyte gSmart S1205 Cougar hard reset

GigaByte gSmart S1205 WM6.5 hard reset (for Gigabyte gSmart S1205 hard reset with keys scroll down)

Restore to Default gSmart S1205 Cougar Dual SIM Clean Boot

Tap Start > Settings > System tab > Clean Boot. Input the 4-digit password in the blank, and then, tap “Restore” to restore to the default setting.

Gigabyte gSmart S1205 hard reset with keys/buttons

Press Camera + Power + Volume UP buttons

Press VOLUME DOWN to restore manufacturer default

Gigabyte g-Smart hard reset

Reboot System: Soft resetWhen you reboot the device, all running programs will stop and you will lose all unsaved information. Please make sure that all information has been saved before performing system reboot.

17 Reset Button:
Press the reset button to reboot your device.

1.Reset key is located on the bottom right side of your device.
2.Use the stylus to softly poke the reset key on the lower right side of the device to reboot your system.

System Reset: Hard reset

When executing system reset, you are performing a clean boot on the device. It will remove the programs you have installed on this device, and reset all settings and information back to factory defaults.

1.Turn off the device.
2.Press the number key 7 and 9 at the same time, and press power key while still holding 7 and 9.
3.This device will restore to system defaults and reboot.

Gigabyte g-Smart i hard reset

Reboot System: (Gigabyte g-Smart i Soft reset)

When you reboot the device, all running programs will stop and you will lose all unsaved information. Please make sure that all information has been saved before performing system reboot.

• 16 Reboot Button

1. Reboot button is located on the bottom right side of your device.
2. Use the stylus to softly poke the reboot button on the lower right side of the device to reboot your system.

System Reset: (Gigabyte g-Smart i Hard reset)

When executing system reset, you are performing a clean boot on the device. It will remove the programs you have installed on this device, and reset all settings and information back to factory defaults.

1.Turn off the device.
2.Press the Call key and End key at the same time, and press power key while still holding Call key and End key.
3.This device will restore to system defaults and reboot.

Gigabyte g-Smart i120 hard reset

Reboot ( Gigabyte g-Smart i120 Soft reset)

Reboot Button (17): Press the reboot button to reboot your device.

System Reset: (Gigabyte g-Smart i120 Hard reset)

When executing system reset, you are performing a clean boot on the device. It will remove
the programs you have installed on this device, and reset all settings and information back
to factory defaults.

1. Turn off the device.
2. Press the Flag key and OK key at the same time, and press Power key while still holding Flag key and OK key.
3. This device will restore to system defaults and reboot.

• 1 Power On / Off
• 7 Windows Flag Key (Flag Key)
• 10 OK Key

Gigabyte g-Smart i128 hard reset

Gigabyte g-Smart i128 system reset hard reset

When executing system reset, you are performing a clean boot on the device. It will remove the programs you have installed on this device, and reset all settings and information back to factory defaults.

1. Turn off the device.
2. Press the Flag key and OK key at the same time, and press Power key while still holding Flag key and OK key.
3. This device will restore to system defaults and reboot.

Gigabyte g-Smart i300 hard reset

Reboot System: (Gigabyte g-Smart i300 Soft reset)

When you reboot the device, all running programs will stop and you will lose all unsaved information. Please make sure that all information has been saved before performing system reboot.

• 16 Reboot Button

1. Reboot button is located on the bottom right side of your device.
2. Use the stylus to softly poke the reboot button on the lower right side of the device to reboot your system.

• 1 Power On / Off
• 7 Windows Flag Key(Flag Key)
• 10 OK Key

System Reset: (Gigabyte g-Smart i300 Hard reset)

When executing system reset, you are performing a clean boot on the device. It will remove the programs you have installed on this device, and reset all settings and information back to factory defaults.

1. Turn off the device.
2. Press the Flag key and OK key at the same time, and press Power key while still holding Flag key and OK key.
3. This device will restore to system defaults and reboot.

Gigabyte GSmart i350 hard reset

Reboot System: Gigabyte GSmart i350 Soft reset

When you reboot the device, all running programs will stop and you will lose all unsaved information. Please make sure that all information has been saved before performing system reboot.

16 Reset Button:
Press the reset button to reboot your device.

1.Reset key is located on the bottom right side of your device.
2.Use the stylus to softly poke the reset key on the lower right side of the device to reboot your system.

System Reset: Gigabyte GSmart i350 Hard reset

When executing system reset, you are performing a clean boot on the device. It will remove the programs you have installed on this device, and reset all settings and information back to factory defaults.

1 ON/OFF key

1.Turn off the device.
2.Press the number key 7 (Flag key) and 10 (OK) at the same time, and press power key while still holding 7 and 10.
3.This device will restore to system defaults and reboot.

Gigabyte GSmart MW700 hard reset

Reboot System: Gigabyte GSmart MW700 Soft reset

When you reboot the device, all running programs will stop and you will lose all unsaved information. Please make sure that all information has been saved before performing system reboot.

Press the reset button to reboot your device.

1.Use the stylus to softly poke the reset key on the lower right side of the device to reboot your system.

System Reset: GSmart MW700 Hard reset

When executing system reset, you are performing a clean boot on the device. It will remove the programs you have installed on this device, and reset all settings and information back to factory defaults.

If the system still lags after rebooting, you will need to clean boot the device. To clean boot, press and hold Camera key and Power Key at
the same time for about 3 seconds and then release. Your device will reset to factory defaults and reboot.

Gigabyte GSmart MW800 hard reset

Reboot System: Gigabyte GSmart MW800 Soft reset

When you reboot the device, all running programs will stop and you will lose all unsaved information. Please make sure that all information has been saved before performing system reboot.

Press the reset button to reboot your device.

1.Use the stylus to softly poke the reset key on the lower right side of the device to reboot your system.

System Reset: GSmart MW800 Hard reset

When executing system reset, you are performing a clean boot on the device. It will remove the programs you have installed on this device, and reset all settings and information back to factory defaults.

If the system still lags after rebooting, you will need to clean boot the device. To clean boot, press and hold Camera key and Power Key at
the same time for about 3 seconds and then release. Your device will reset to factory defaults and reboot.

Gigabyte GSmart t600 hard reset

Reboot Gigabyte GSmart t600 System: Soft reset

When you reboot the device, all running programs will stop and you will lose all unsaved information. Please make sure that all information has been saved before performing system reboot.

16 Reset Button:
Press the reset button to reboot your device.

1.Reset key is located on the bottom right side of your device.
2.Use the stylus to softly poke the reset key on the lower right side of the device to reboot your system.

System Reset: Gigabyte GSmart t600 Hard reset

When executing system reset, you are performing a clean boot on the device. It will remove the programs you have installed on this device, and reset all settings and information back to factory defaults.


1 ON/OFF key

1.Turn off the device.
2.Press the number key 7 (Flag key) and 9 (OK) at the s

Google Nexus Q hard reset

Google Nexus Q hard reset

Manual factory data reset media-streaming entertainment device
You can also factory reset your Nexus Q without using your phone or tablet:
1. Unplug the Nexus Q, then plug it in again.
2. As soon as the ring LED lights up, place your palm over the single LED on top.
The ring LED starts flashing red. Keep your palm in place until the ring LED starts to display a rotating blue spot (about 10 seconds).
If you lift your finger too soon, the LED turns solid red. If this happens, unplug and plug in the Nexus Q again to start over.
During a successful reset, the ring LED pulses purple to indicate that it's wiping all data. Once the reset is complete, the Nexus Q starts up
again, displaying a rotating blue spot. After a short time, it displays a solid color to indicate it's ready to be set up again.

Google Nexus 10 hard reset

Google Nexus 10 hard reset

How to get into Nexus 10 recovery mode

Turn off your Nexus 10 tablet. Press and hold Volume UP+DOWN+POWER buttons and plug in to your computer the tablet to get into the recovery mode.
Select Wipe data Factory reset and then choose yes to confirm. All data will be lost!

To reset your Nexus 10 hard reset phone to factory settings and erase all the data on your phone, Select Settings → Back up and reset→ Factory data reset → Reset tablet→ Delete all.

or older firmware
1. From the Home screen, press the Menu Key and touch Settings.
2 Touch the Privacy
4 Touch Factory data reset.
5 Touch Reset tablet.
6 Touch Erase everything.

Google Nexus 7 hard reset

Google Nexus 7 hard reset

How to get into Nexus 7 recovery mode

Turn off your Nexus 7 tablet. Press and hold Volume UP+DOWN+POWER buttons and plug in to your computer the tablet to get into the recovery mode.
Select Wipe data Factory reset and then choose yes to confirm. All data will be lost!


1. From the Home screen, press the Menu Key and touch Settings.
2 Touch the Privacy
4 Touch Factory data reset.
5 Touch Reset tablet.
6 Touch Erase everything.

Google Nexus S hard reset

Google Nexus S hard reset

1. Press volume up then power until robot
2. Select recovery with volume down and press power
3. then you will see robot + exclamation you must hold volume up again + power
4. Choose factory data reset and wait until phone is wiped
5. Choose reboot now once wiping is done

Press VOLUME UP + POWER when you see this exclamation mark with droid

---

With the Nexus S turned off Press VOLUME UP + POWER on the phone.

In the Recovery menu select (with Volume DOWN) RECOVERY, then press POWER.

When you see the exclamation mark and the Android, you should hold down the power button and then press the volume up key, while still holding the power button. Don't press them both at the same time.

Nexus S will reboot, After Google logo Android appeares. If it won't reboot after a few minutes, just take out battery, then reinsert it.

Google Nexus Prime hard reset

Google Nexus Prime hard reset

With the Nexus Prime turned off Press VOLUME UP + POWER on the phone.

In the Recovery menu select (with Volume DOWN) RECOVERY, then press POWER.

Nexus Prime will reboot, After Google logo Android appeares. If it won't reboot after a few minutes, just take out battery, then reinsert it.

Press VOLUME UP + POWER when you see this exclamation mark with droid

Your device freezes or has fatal errors
If your device freezes or hangs, you may need to close programs or reset the device to regain functionality. If your
device is frozen and unresponsive, press and hold the Power key for 10-15 seconds. The device will reboot automatically.

While using your device, be sure to back up important data. When disposing of your device, back up all data and then reset your device to prevent misuse of your personal information.

Try to reset your Nexus Prime Cell phone using settings menu

If your phone is responding to screen input, then open Settings from the Applications menu. Tap Backup & reset > Factory data reset, click Reset phone and then Erase everything to format your phone.

Google Nexus ONE hard reset

Google Nexus ONE hard reset

You can do a hard reset from the menu here or with buttons see below

Applications SETTINGS > PRIVACY > FACTORY DATA RESET. This will ERASE ALL DATA on GOOGLE NEXUS ONE!
TAP RESET Phone than EREASE EVERYTHING. NEXUS 1 WILL REBOOT!

Google Nexus ONE hard reset with buttons / keys

Howto reset Android 2.1 - hard reset htc nexus one

Wipe data format nexus one

IF YOUR NEXUS ONE SCREEN FROZEN
Power off Nexus ONE remove/reinsert battery if power button not responding.
Hold down VOLUME DOWN and push POWER ON button for one sec. Release buttons.

You will see a boot menu HBOOT with various options.
NEXUS ONE FASTBOOT, RECOVERY, CLEAR STORAGE and SIMLOCK menu options.
Select with Volume up / down keys and Enter option with POWER button.

IF you choose nexus one Recovery and you see a yellow exclamation point and green droid

E:Can't open /cache/recovery/command

just press volume down +power key and you will see

android system recovery <2e>

with the track ball highlight an item and click to select from the blue menu

android reboot system now

apply sdcard:update.zip

android wipe data / factory reset

android wipe cache partition

Google Ion hard reset

Google Ion hard reset

Factory reset

To reset the Google Ion phone using phone buttons

1. With the phone turned off, press and hold the HOME and BACK buttons.
2. Briefly press the END CALL/POWER button while continuing to press the HOME and BACK buttons.
3. When you see the screen with the 3 Android images, release the HOME and BACK buttons, and then press the TRACKBALL.

Tip If your phone hangs or freezes, remove the battery then wait for a few seconds, and then re-install it. After re-installing the battery, turn on the phone.

Google Ion Soft reset

Resetting the Google Ion Android phone

Resetting the phone deletes all data, including downloaded applications, and the phone back to its initial state, the state before you turned on the phone for the first time.
Important Make sure to back up important data you have on the phone before you perform a factory data reset.

To reset the phone


1. Press HOME > MENU, then touch Settings.
2. Scroll down the screen, then touch SD card & phone storage.
3. Navigate to the Internal phone storage section, then touch Factory data reset.
4. On the Factory data reset screen, touch Reset phone and then touch Erase everything.

( To reset the Google Ion phone using phone buttons scroll down)