Walton Primo C1 hard reset done

hold volume+ and volume – together then hold power key

then you will see a recovery mode

reboot system now

apply sdcard:update.zip

wipe data/factory reset

wipe cache partition

select

wipe data/factory reset

yes …….delete all user data

wait few minute

then

reboot system now

now see all is well……………………………

All Walton Primo android hard reset Done

keep preesing v+ v- and power
you will show recovery mode
wipe data/factory reset by pressing power button
thats all.
tested

1000000000%

Walton Primo X1 Software, Flashtools and Drivers

1. Install driver.
2. Open Flash Tool



3. Open Download Agent and select MTK_AllinOne_DA



4. Open scatter_loading and select scatter file
Software-> WBWS305WA_0201_T5056 -> MT6589_Android_scatter_emmc.txt



5. Click Firmware->Upgrade and connect USB cable with mobile Off

6. Then start downloading..

7. When it shows Firmware Upgrade , then installation is completed.



After Firmware Upgrade give Reset to Factory Setting

 X1 software, flashtools & driver.txt (0.13 kB - downloaded 199 times.)

Walton Primo X1 Software, Flashtools and Drivers [ Update & Bugfixed ]

Release note
*Overall performance improvement
*Bug fixing for 3rd party camera apps and video calling (dark issue)



1. Install driver

2. Open Flash Tool (Video Tutorial)



3. Open Download Agent and select MTK_AllinOne_DA



4. Open scatter_loading and select scatter file
Software-> WBW5883WA_0301_T5393 -> MT6589_Android_scatter_emmc.txt



5. Click Firmware->Upgrade and connect USB cable with mobile without battery

6. Insert Battery then start downloading..

7. When it shows Firmware Upgrade , then installation is completed.



After Firmware Upgrade give Reset to Factory Setting

Firmware, Driver & Flashtools Download Link : http://goo.gl/YLLfS        

Walton Primo R1 Software, Flashtools and Drivers

Please Check the attachment & download from the link to get all the softwares.

 Link for Walton Primo R1 Flashtool , Softwares.txt (0.1 kB - downloaded 189 times.)

Bravia Engine 2 Mod For Walton Primo R1

"   Tutorial "
Make sure your Primo R1 has installed the custom CWM Recovery and Nandroid backup  Link http://www.mediafire.com/?zsodf48r3g3661o
2. Download the Sony Bravia Engine Mod： click here http://db.tt/8EGGhGX1
3. Get into the CWM Recovery
4. install zip from sdcard
5. choose Bravia.zip
6.clear dlvik cache and cache file
6. reboot system now
DONE, Enjoy!!! (Do ur of risk)   

Note: For CWM Recovery go to this post http://www.waltonforum.com/index.php?topic=1686.0

Walton Primo R1 Custom CWM Recovery

CWM Recovery Tutorial For Primo R1★
Download the recovery file from here http://
www.mediafire.com/?zsodf48r3g3661o
Rename this file to recovery.img
Transfer the renamed file to your phone’s SD card.
Download MobileUncle MTK tools from Google
Play on your Walton Primo R1 and install it.
Open the MTK tools app.
Select the Recovery Update option, now choose
the recovery.img that you have just transferred to
your Primo R1
The app will flash CWM recovery on your Primo R1
now.
Your phone will reboot in CWM recovery after which
you can do anything you like.(Well, almost). You can
boot into CWM recovery anytime by turning your
phone OFF, press and hold volume down + volume
up + power buttons until the screen turns on. After
which you could take a nandroid backup (which is
optional) and reboot your device.
Note:Do Ur Own Risk.

Walton Primo NX Firmware, Flashtools & Drivers [ Bugfixed ]

1. Multiple ringtones (can set a different ringtone for each SIM card)

Firmware Download Link : http://www.mediafire.com/?gep7a1nd4kem2c0

1.Install driver:

1st step: Power Off the phone and  Connect your phone with PC via USB cable. Now go to    My Computer>Manage> Other devices> MT65xx Preloader

2nd step: A window will appear like below and select Browse my computer for driver software

3rd step: To select driver go to driver folder> USB VCOM Driver> Win7

4th step: Windows security window will appear. Select Install this driver software anyway

5th step: Wait until Windows has successfully updated your driver software

6th step: Now go to Driver Folder> Open MS_USB_ComPort_Driver_exe_v1.1032.1 > Install Driver

2. Open Flash Tools MultiportDownload.exe (From "Download Tools" folder)

3. Select smart phone and press ok.

4. Click "Select file" for select scatter file
5. Select scatter file (MT6589_Android_scatter_emmc) from software folder (Under "WALTON_Primo_NX_Firmware" folder)

6. Download file load successfully will show. click "ok" button.
7. Press "Start all"

8. Under POWER OFF mode press & hold Volume up and down key together, then put USB cable in to Handset charging port
(with battery). Software process will be start within few second.

Walton Primo N1 Software, Flashtools and Drivers

1. Install driver.
2. Open Flash Tool



3. Open Download Agent and select MTK_AllinOne_DA



4. Open scatter_loading and select scatter file
Software-> WBW5883WA_0301_T5393 -> MT6589_Android_scatter_emmc.txt



5. Click Firmware->Upgrade and connect USB cable with mobile without battery

6. Insert Battery then start downloading..

7. When it shows Firmware Upgrade , then installation is completed.



After Firmware Upgrade give Reset to Factory Setting

 N1 Flashtools , Software & Driver link.txt (0.11 kB - downloaded 109 times.)

Walton Primo N1 Software, Flashtools and Drivers [ Update & Bugfixed ]

Release note
*Overall performance improvement
*Bug fixing for 3rd party camera apps and video calling (dark issue)



1. Install driver

2. Open Flash Tool (Video Tutorial)



3. Open Download Agent and select MTK_AllinOne_DA



4. Open scatter_loading and select scatter file
Software-> WBW5883WA_0301_T5393 -> MT6589_Android_scatter_emmc.txt



5. Click Firmware->Upgrade and connect USB cable with mobile without battery

6. Insert Battery then start downloading..

7. When it shows Firmware Upgrade , then installation is completed.



After Firmware Upgrade give Reset to Factory Setting

Firmware, Driver & Flashtools Download Link : http://goo.gl/NF6Fb

Walton Primo H2 android 4.2.2 update VIDEO tutorial

যারা walton এর দেয়া Image tutorial টি দেখে বুঝতে পারছেন না তাদের জন্য "WALTON PRIMO H2 users" নামের ফেসবুক গ্রুপের তরফ থেকে একটা ভিডিও tutorial.   

ভিডিও লিঙ্কঃ https://vimeo.com/71426277

আশা করছি এটা আপনাদের উপকারে আসবে।

H2 সম্পর্কিত সকল update এর জন্য জয়েন করুন

https://www.facebook.com/groups/168600853310005

Walton Primo H2 Flashtool,Firmware, driver[UPDATE to Android 4.2.2 (Jellybean)]

Release Note:
1> Update OS from 4.2.1 to 4.2.2
2> Minor bug fixing
3> More battery stand by time
4> Overall performance is more smooth, faster than previous



1.Install driver:

1st step: Power Off the phone and  Connect your phone with PC via USB cable. Now go to My Computer>Manage> Other devices> MT65xx Preloader



2nd step: A window will appear like below and select Browse my computer for driver software



3rd step: To select driver go to driver folder> USB VCOM Driver> Win7





4th step: Windows security window will appear. Select Install this driver software anyway



5th step: Wait until Windows has successfully updated your driver software



6th step: Now go to Driver Folder> Open MS_USB_ComPort_Driver_exe_v1.1032.1 > Install Driver





2.Open Flash Tool



3.Open  Download Agent and select MTK_AllinOne_DA



4. Open scatter_loading and select SW---> Software-> Primo_H2_V4.3_2013-05-29 MT6589_Android_scatter_emmc.txt



5. Click  Download and connect USB with mobile (without battery)

6.When it shows Download ok in green, the installation is completed.



Download firmware (Android 4.2.2 for H2):- http://www.mediafire.com/?jarb746xdqlapre

Download Flashtools & drivers :- http://www.mediafire.com/?d2exw8b0fdgrb8r

Walton Primo H1 Firmware

WALTON Primo H1 Software update (AP+BP) Guide

Driver installation

1) Install AP part driver
Power off handset, press “Power key + Voice Up key” until the screen shows green, plug in usb cable, PC will remind you of installing new hardware. Unzip “ Driver”, select adb driver file, install AP driver.

Path: Right click on My computer>Manage>Device manager>Android(Yellow notification)>Update driver software>browse path> select adb folder >Continue anyway>finish
When you install AP driver successfully, you will find “Fastboot interface” in device manager. As below

2) Install BP part driver

(i) Power off  handset, press “Power key + Voice down key” until the screen shows QPST mode, plug in 5Pin USB cable, Unzip “Driver”, select HK11-VB717-27_1.0.56 driver file, install BP driver.
Path: Right click on My computer>Manage>Device manager>Tiyanyu HS-USB Driver (Yellow notification)>Update driver software>browse path> HK11-VB717-27_1.0.56\Win32\x86\free >Continue anyway>finish.
(ii) When your BP driver is installed successfully, you will find Qualcomm HS-USB ports in device manager. As below:

Software Upgrading:

1.Download BP
Open EMMC_Download_V1.2.4  tool, set your handset into BP mode (Power key+ Voice down key) and connect your phone with USB cable.

1. Click set path>Browse folder>Select 593517_8734_WCDMA_V0038
2. Click Download




2.AP Download:

Open Qualfast 2.0.5  tool, set your handset into AP mode (Power key+ Voice up key) and connect your phone with USB cable.

1. Click Set path>Browse folder>Select 593517_8734_V006021
2. Click Ok for Start download.
3.   Run *#8929#

4.Built-in apps installing

a)   Put update_walton_H1.zip  into root directory of SD card .
b)   Run *#8348#

Note: If your antivirus detects Flash Tool as virus, disable your antivirus till software is finish.

Please Login to the forum to see the Mediafire link

 Primo H1 Firmware download link.txt (0.04 kB - downloaded 92 times.)