MiTAC Mio A501 hard reset

Mitac Mio A501 Soft reset

Resetting Your Device

CAUTION: Resetting will cause unsaved data to be lost.
Resetting the device is similar to restarting your desktop computer. It restarts the operating system, but you will lose any unsaved data.
Occasionally, you may need to reset the device; for example, you should reset when the device stops responding; in other words, it appears to be frozen or locked up.
Use the stylus to press the reset button on the device.

Mitac Mio A501 Hard reset

Restoring Factory Default State

In some cases, you may need to restore the device to the factory default state by clearing the memory from the device. For example, you should clear the memory:

• When the device does not respond after being reset.
• When you forget your password.

Clearing the memory means all data you have entered in the device's memory, including all files, system settings and additional programs you
have installed, will be erased. (Programs installed to ROM at the factory are not affected.)
CAUTION: To ensure the integrity of your data should it be necessary to clear the memory, you are advised to regularly back up your data.

Follow this procedure to clear the memory from the device:

1. Make sure that the device is turned off.

2. Press the Power button on the top of the device, and then press and hold the Talk button  on the front panel until the device vibrates.
3. The device will turn on automatically. The backlight of the keypad will glow, and the setup wizard will appear on the screen. Follow the
on-screen instructions to complete the setup wizard.
4. Re-establish a partnership with your desktop computer.
5. Re-install the add-on software, if necessary.

try this way i hope solve your problem 

MiTAC Mio A700 hard reset

Mitac Mio A700 soft reset

Press the RESET hole on Mio A700 to restart.

Mitac Mio A700 hard reset

To clear the memory device:
1. Make sure that A700 is turned off.
2. Press and hold the volume down and the END CALL red button.
3. After the vibration .
4. A700 automatically turn on. Lights up the keyboard and the screen setup wizard appeare. Follow the instructions on the screen.
5. Restore the partnership with your desktop PC.
6. Reinstall the necessary additional software.

MiTAC Mio A701 hard reset

Mitac Mio A701 Hard reset  Soft reset

Resetting Your Mio A701
CAUTION: Resetting will cause unsaved data to be lost.
Resetting your A701 is similar to restarting your desktop computer. It restarts
the operating system, but you will lose any unsaved data.
Occasionally, you may need to reset your A701;
for example, you should reset when your A701
stops responding; in other words, it appears to be
“frozen” or “locked up.”
Use the stylus to press the reset button on your
A701.

Restoring Factory Default State A701 Hard reset

In some cases, you may need to restore your A701 to the factory default state by
clearing the memory from your A701. For example, you should clear the
memory:

• When your A701 does not respond after being reset.
• When you forget your password.

Clearing the memory means all data you have entered in A701’s memory,
including all files, system settings and additional programs you have installed,
will be erased. (Programs installed to ROM at the factory are not affected.)
CAUTION: To ensure the integrity of your data should it be necessary to clear the
memory, you are advised to regularly back up your data.

Follow this procedure to clear the memory from your A701:

1. Make sure that A701 is turned off.
2. Press and hold the Down Volume button. When holding it, press and hold the  End button.
3. After A701 vibrates, you can let go of both buttons.
4. A701 will turn on automatically. The backlight of the keypad will glow, and the setup wizard will appear on the screen. Follow the on-screen
instructions to complete the setup wizard.
5. Re-establish a partnership with your desktop computer.
6. Re-install the add-on software, if necessary.

MiTAC Mio A702 hard reset

Mitac Mio A702 Soft reset

Use the stylus to press the reset button on the
device

In some cases, you may need to restore the device to the factory default state
by clearing the memory from the device. For example, you should clear the
memory:

• When the device does not respond after being reset.

• When you forget your password.

Clearing the memory means all data you have entered in the device’s
memory, including all files, system settings and additional programs you
have installed, will be erased. (Programs installed to ROM at the factory are
not affected.)
CAUTION: To ensure the integrity of your data should it be necessary to clear the
memory, you are advised to regularly back up your data.

Mitac Mio A702 hard reset

Follow this procedure to clear the memory from the device:

1. Make sure that the device is turned off.
2. While pressing and holding the Power button, press and hold the Talk
button until the device vibrates.
3. The device will turn on automatically. The backlight of the keypad will
glow, and the setup wizard will appear on the screen. Follow the
on-screen instructions to complete the setup wizard.
4. Re-establish a partnership with your desktop computer.
5. Re-install the add-on software, if necessary.

yes 100% tested way try this i hope solve your problem

MiTAC Mio H610 hard reset

MiTAC Mio H610 Soft Reset

Resetting Your System
Occasionally, you may need to reset your device. For example, you should reset your system when it stops
responding; or appears to be frozen or locked up.
Insert a small rod, such as a straightened paperclip, into the reset button of your device. This is called a soft
reset. The Home screen should appear after a soft reset.

2 Reset Button: Restarts your device (soft reset).

How can I reset my Mio H610?

MiTAC Mio H610 Soft Reset

If your device is not working properly. you can try a soft reset. On the right hand side of your device. you'll find a small opening. containing the reset button. Push it once with the tip of the stylus at the end of wrist strap to perform a soft reset.

MiTAC Mio H610 Soft Reset

You can also restart your Mio H610 by tapping the Restart icon.

MiTAC Mio H610 Hard Reset

If this does not solve your problem. You may try a hard reset. Pushing the on/off button for 4 to 5 seconds will hard reset your device. Push the button again for 4 to 5 seconds to start it up again.
tested way try this i hope solved your problem not solve comments plz itry your help

MiTAC Mio P340 hard reset

Mitac Mio P340 Soft reset

Resetting Your Pocket PC
CAUTION: Resetting will cause unsaved data to be lost.
Resetting your Pocket PC is similar to restarting your desktop computer. It restarts the operating system, but you will lose any unsaved data.
Occasionally, you may need to reset your Pocket PC; for example, you should reset:

• After you restore data from your desktop computer.

• When your Pocket PC stops responding; in other words, it appears to be frozen or locked up.

Use the stylus to press the reset button on your Pocket PC.

Mitac Mio P340 Hard reset

Restoring Last State
Follow this procedure to restore your Pocket PC to the last state when your
Pocket PC does not respond after being reset.
1. Disconnect all cables, including the AC adapter, from your Pocket PC.
2. Slide the ON/OFF switch to the OFF position.
3. Wait for 1 minute and then slide the switch back to the ON position.

4. Your Pocket PC turns on.
NOTE: You need to restore your Pocket PC to factory default state if you have set up a password but forget it.

100% tested way tested this 

MiTAC Mio P360 hard reset

Resetting your Pocket PC Mio P360 Soft reset

CAUTION! Resetting will cause unsaved data to be lost.

Resetting your Pocket PC allows you to restart the operating system, but you will lose any unsaved data.

Occasionally you may need to reset your Pocket PC, for example you should reset your mio p360 when it stops responding.

In other words it appears frozen or locked up. Follow the procedure to reset Mio P360:

1. Slide the ON/OFF switch to the OFF position.
2. Wait for 1 minute and then slide the switch back to the ON position.
3. Mio P360 turns ON.

Mio P360 Hard reset

Restoring the factory default state of Mio P360

In some cases, you may need to restore your Pocket PC to the factory default state by
clearing the memory (RAM) from your Pocket PC. For example, yshould clear the memory:

• the factory default state does not respond after soft reset.
• When you forget your password.

Claring the memory means all data you have entered in RAM, including all files, system settings and additional programs you have installed, will be erased.

NOTE: The files stored in My Flash DISK will not be erased.

1. Disconnect all cables, including the AC charger, from your POCKET PC.
2. Push the navigation stick upward and slide the ON/OFF switch to the position.
3. While holding the navigation stick, slide the switch back to ON again.
4. Your Pocket PC turns on and performs the initial start up.

MiTAC Mio P350 hard reset

Mitac Mio P350 Soft reset

Resetting Your Pocket PC - Soft reset

CAUTION: Resetting will cause unsaved data to be lost.

Resetting your Pocket PC is similar to restarting your desktop computer. It restarts the operating system, but you will lose any unsaved data.
reset:

• After you restore data from your desktop computer.

• When your Pocket PC stops responding; in other words, it appears to be “frozen” or “locked up.”

Use the stylus to press the reset button on your Pocket PC.

Restoring Last State - Mitac Mio p350 Hard reset

Follow this procedure to restore your Pocket PC to the last state when your Pocket PC does not respond after being reset.

1. Disconnect all cables, including the AC adapter, from your Pocket PC.
2. Slide the ON/OFF switch to the OFF position.
3. Wait for 1 minute and then slide the switch back to the ON position.

4. Your Pocket PC turns on.

Mitac Mio P350 Hard reset

To reset your Mio p350 to factory default settings:

Press up button during cold boot until splash screen is shown


OR


Tap

Start menu > Settings > System > SysInfo

Then tap Clean Boot tab

To reset the device to the factory default settings tap Start and input 000, (3 null) as shown below, then tap OK. Mio P550m restarting.

 

try this i hope solved your problem i try this way 100% tested thic way

MiTAC Mio P550 hard reset

Resetting Your Mio P550 Pocket PC - Soft reset

CAUTION: Resetting will cause unsaved data to be lost.
Resetting your Pocket PC is similar to restarting your desktop computer. It restarts the operating system, but you will lose any unsaved data.
reset:

• After you restore data from your desktop computer.

• When your Pocket PC stops responding; in other words, it appears to be frozen or locked up.

Use the stylus to press the reset button on your Pocket PC.

Restoring Last State - Mitac Mio P550 Hard reset

Follow this procedure to restore your Pocket PC to the last state when your Pocket PC does not respond after being reset.

1. Disconnect all cables, including the AC adapter, from your Pocket PC.
2. Slide the ON/OFF switch to the OFF position.
3. Wait for 1 minute and then slide the switch back to the ON position.

4. Your Pocket PC turns on.

Mitac Mio P550 Hard reset

To reset your Mio P550 to factory default settings:

Press up button during cold boot until splash screen is shown


OR via menu

Tap

Start menu > Settings > System > SysInfo, then tap Clean Boot tab

Then tap Clean Boot tab

To reset the device to the factory default settings tap Start and input 000, (3 null) as shown below, then tap OK. Mio P550 restarting.

 

Try this i hope solve your problem i'm tested this way

MiTAC Mio P550m hard reset

Resetting Your Mio P5500m Pocket PC - Soft reset

CAUTION: Resetting will cause unsaved data to be lost.
Resetting your Pocket PC is similar to restarting your desktop computer. It restarts the operating system, but you will lose any unsaved data.
reset:

• After you restore data from your desktop computer.

• When your Pocket PC stops responding; in other words, it appears to be “frozen” or “locked up.”

Use the stylus to press the reset button on your Pocket PC.

Restoring Last State - Mitac Mio P550m Hard reset

Follow this procedure to restore your Pocket PC to the last state when your Pocket PC does not respond after being reset.

1. Disconnect all cables, including the AC adapter, from your Pocket PC.
2. Slide the ON/OFF switch to the OFF position.
3. Wait for 1 minute and then slide the switch back to the ON position.

4. Your Pocket PC turns on.

Mitac Mio P550m Hard reset

To reset your Mio P550m to factory default settings:

Press up button during cold boot until splash screen is shown

OR

Tap Start menu > Settings > System > SysInfo

Then tap Clean Boot tab

To reset the device to the factory default settings tap Start and input 000, (3 null) as shown below, then tap OK. Mio P550m restarting.

 

Try this i hope solve your problem itry this 100% tested