MiTAC Mio P560 hard reset

Resetting your Pocket PC Mio P560 Soft reset

CAUTION! Resetting will cause unsaved data to be lost.

Resetting your Pocket PC allows you to restart the operating system, but you will lose any unsaved data.

Occasionally you may need to reset your Pocket PC, for example you should reset your mio p560 when it stops responding.

In other words it appears frozen or locked up. Follow the procedure to reset Mio P560:

1. Slide the ON/OFF switch to the OFF position.
2. Wait for 1 minute and then slide the switch back to the ON position.
3. Mio P560 turns ON.

Mio P560 Hard reset

Restoring the factory default state of Mio P560

In some cases, you may need to restore your Pocket PC to the factory default state by
clearing the memory (RAM) from your Pocket PC. For example, yshould clear the memory:

• the factory default state does not respond after soft reset.
• When you forget your password.

Claring the memory means all data you have entered in RAM, including all files, system settings and additional programs you have installed, will be erased.

NOTE: The files stored in My Flash DISK will not be erased.

1. Disconnect all cables, including the AC charger, from your POCKET PC.
2. Push the navigation stick upward and slide the ON/OFF switch to the position.
3. While holding the navigation stick, slide the switch back to ON again.
4. Your Pocket PC turns on and performs the initial start up.

MiTAC Mio C250 hard reset

Resetting Your System Soft reset

Occasionally, you may need to reset your device. For example, you should reset your system when it stops responding; or appears to be “frozen” or “locked up.” Try to restart your device by pressing the power button and tap Restart. If this doesnot work, press the power button for 6 seconds to shut down press the power button for 6 seconds to start up the device.

2 Power Button Turns on and off the device.

Tap Restart if you want to restart the device because of software failures.

 

Try This way i hope solve your problem try and comment this blog i try your help

MiTAC Mio C620 hard reset hard reset

Resetting Your System
Occasionally, you may need to reset your device. For
example, you should reset your system when it stops
responding; or appears to be “frozen” or “locked up.”

Restarting Your Device To restart your device, press the power button for 5 seconds until the "Power Off Selection" screen appears and then tap Restart. 

This Post !00% tested try this i hope solved your problem

MiTAC Mio MOOV 330 hard reset hard reset

Reset Mio 510 Mio 560 Mio 580 devices

Shutdown and hardware reset
Occasionally, you may need to perform a hardware reset when your Mio stops responding; or appears to be
“frozen” or “locked-up.”
You can perform a hardware reset by shutting down your Mio and then turning it back on. To shut down your
Mio, slide the power switch to the RESET position. To turn on your Mio after shutting it down, slide the power
switch to the ON position.

To restore Mio MOOV 330 all settings to their factory defaults go to Preferencies > Restore defaults, then choose Yes.

 

 

This Post 100% tested Try This I Hope Solved Your Problem Tnx Visit My Blog

MiTAC Mio MOOV 200 hard reset hard reset

To restore Mio MOOV 200 N177 all settings to their factory defaults go to Preferencies > Restore defaults, then choose Yes.

Shutdown and hardware reset Mio 210 Moov 100 moov 150 hard reset
Occasionally, you may need to perform a hardware reset when your Mio stops responding; or appears to be
“frozen” or “locked-up.”
You can perform a hardware reset by shutting down your Mio and then turning it back on. To shut down your
Mio, slide the power switch to the RESET position. To turn on your Mio after shutting it down, slide the power
switch to the ON position.

 

Try This I Hope Solved Your Problem