Sony Ericsson T600 hard reset

Sony Ericsson T600 hard reset via firmware update

Download PC companion and install

Install PC companion on your PC computer. Follow instruction. For firmware update you need a USB cable.

After your phone connected press Start / in Support Zone

You can also use Sony Ericsson update service tool

PC Suite is out of date use PC companion software

If nothing works: As last resort  do a Sony Ericsson phone repaire with PC Suite.  After installation Select ----> TOOLS > PHONE REPAIR

Download PC Companion for your phone

http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/pcsuite/aino?cc=gb&lc=en

Sony Ericsson T300 hard reset

If nothing works: As last resort do a Sony Ericsson phone repaire with PC Suite. Use this method to hard reset AFTER INSTALLATION----> TOOLS > PHONE REPAIR

http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/pcsuite/aino?cc=gb&lc=en

Sony Ericsson T200 hard reset

If nothing works: As last resort do a Sony Ericsson phone repaire with PC Suite. Use this method to hard reset AFTER INSTALLATION----> TOOLS > PHONE REPAIR

http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/pcsuite/aino?cc=gb&lc=en

Sony Ericsson Z700 hard reset

If nothing works: As last resort do a Sony Ericsson phone repaire with PC Suite. Use this method to hard reset AFTER INSTALLATION----> TOOLS > PHONE REPAIR

http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/pcsuite/aino?cc=gb&lc=en

Sony Ericsson T68i hard reset

If nothing works: As last resort do a Sony Ericsson phone repaire with PC Suite. Use this method to hard reset AFTER INSTALLATION----> TOOLS > PHONE REPAIR

http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/pcsuite/aino?cc=gb&lc=en

Sony Ericsson A8i hard reset

the hard reset the phone will reinstall the software included.

Note: Backup the files that you want to keep, before you perform a hard reset. You can backup files via a computer or a memory card.

firmware update with PC companion software

Download PC companion and install

Install PC companion on your PC computer. Follow instruction. For firmware update you need a micro USB cable. When the pc recognizing your XPERIA Ray it will install the necessary driver files.

After your XPERIA Ray connected press Start / in Support Zone

You can also use Sony Ericsson update service tool

PC Suite is out of date use PC companion software instead

If nothing works: As last resort do a Sony Ericsson phone repaire with PC Suite. Use this method to hard reset AFTER INSTALLATION----> TOOLS > PHONE REPAIR

http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/pcsuite/aino?cc=gb&lc=en

Sony Ericsson Aino hard reset

If nothing works: As last resort do a Sony Ericsson phone repaire with PC Suite. Use this method to hard reset AFTER INSTALLATION----> TOOLS > PHONE REPAIR

http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/pcsuite/aino?cc=gb&lc=en

Sony Ericsson Aspen hard reset

Restore Aspen M1i phone to factory default settings

Restoring your phone can be useful if you lend out the phone or just want to restore your phone to factory default settings and delete all user data, such as contacts, messages, and downloaded games. Remember to backup Encrypted files before you use Master Reset, or update the ROM system
software, to be able to access the encrypted files on the storage card afterwards.

To reset the phone to factory default settings:

1. Remove the battery cover and the stylus. Locate the small hole (see picture).

2. Press and hold the stylus into the slot below the battery to the right.

Insert a thin object into the hole and press down briefly.

3. The phone restarts.
The content of your phone will not be deleted.

To reset the phone to factory settings and delete all phone content, such as contacts, messages and downloaded games:

1. Tap the Start icon > Settings > System > Master reset.
2. Enter the code.
3. The phone restarts.

Note: When resetting the phone to factory settings, you may lose content that was in the phone when you purchased it.

If nothing works: As last resort do a Sony Ericsson phone repaire with PC Suite. Use this method to hard reset AFTER INSTALLATION----> TOOLS > PHONE REPAIR

http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/pcsuite/aino?cc=gb&lc=en

Sony Ericsson BRAVIA S004 hard reset

If nothing works: As last resort do a Sony Ericsson phone repaire with PC Suite. Use this method to hard reset AFTER INSTALLATION----> TOOLS > PHONE REPAIR

http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/pcsuite/aino?cc=gb&lc=en

Sony Ericsson C510 hard reset

C510 Master reset

If you select Reset settings, the changes that you have made to settings will be deleted.
If you select Reset all, your settings and content, such as contacts, messages, pictures, sounds and downloaded
games, will be deleted. You may also lose content that was in the phone at purchase.

To reset the phone
1 From standby select Menu > Settings > the General tab > Master reset.
2 Select an option.
3 Follow the instructions that appear.

When your phone is frozen pull out battery and reinsert it. Turn on your C510.

Restart your C510 phone every day to free memory or do a Master reset.

Use PC Companion

Direct link to PC Companion for C510:

http://www.sonyericsson.com/cws/support/mobilephones/downloads/subject/pccompanion/c510?cc=gb&lc=en

or use old PC Suite

If nothing works: As last resort do a Sony Ericsson phone repaire with PC Suite. USE THIS METHOD FOR hard reset AFTER INSTALLATION----> TOOLS > PHONE REPAIR

http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/pcsuite/aino?cc=gb&lc=en

Sony Ericsson C901 GreenHeart hard reset

If nothing works: As last resort do a Sony Ericsson phone repaire with PC Suite. Use this method to hard reset AFTER INSTALLATION----> TOOLS > PHONE REPAIR

http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/pcsuite/aino?cc=gb&lc=en

Sprint PPC-6601 hard reset

Resetting the Sprint PPC-6601
You can perform a soft reset or a full reset. During a soft reset, the device is restarted and
only some data in opened programs may be lost. However, a full reset turns the battery off,
returns the device to its original factory settings, and deletes all programs, files, contacts and
other information you have saved to the device. Therefore, it is extremely important to back up
data to a storage card or your computer on a regular basis in the event that a full reset has to
be performed.

To perform a soft reset:

If your Sprint PPC-6601 responds slowly, stops responding, or freezes, you can soft reset it.
A soft reset causes the Sprint PPC-6601 to restart and re-adjust memory allocation. Unsaved
data in any opened applications may be lost. Use the stylus to press and hold the Reset button,
as shown bellow.

To perform a full reset:

A full device reset clears memory, deletes all data and restores the Sprint PPC-6601 to itsdefault settings.

Programs installed at the factory remain,
erasing all data that you have created and programs you
have installed.
Press and hold the power button, and then use the stylus to
press the soft reset button at the same time. Be sure you
have backed up all your data in a SD card or on your PC
before performing a full reset.

Sprint PPC-6700 hard reset

Resetting Your Sprint PPC-6700 Device

To perform a soft reset:

Use the stylus to lightly press and hold the RESET button on the bottom of your PPC-6700. The device restarts, and then displays the Today screen.

Tip:To avoid data lost, please turn off your device before performing a soft reset.

To perform a Sprint PPC-6700 hard reset:

1. Press and hold both SOFT KEYs on the device. Keep these keys pressed, and at the same time, use the stylus to lightly press and hold the RESET button on the bottom of your device.
2. Press either Y to restore to factory default, or N to exit the hard reset process.

Symbol MC3070 Color hard reset

Resetting the Mobile Computer

If the mobile computer stops responding to input, reset it. There are two reset functions, warm boot and cold boot. A warm boot
restarts the mobile computer by closing all running programs. All data that is not saved is lost.

A cold boot also restarts the mobile computer, but erases all stored records and entries from RAM. In addition it returns formats,
preferences and other settings to the factory default settings.
Perform a warm boot first. If the mobile computer still does not respond, perform a cold boot.

Performing a Warm Boot - Soft reset

To perform a warm boot:

1. Press and simultaneously hold 7, 9 and Power. Do not hold down any other keys or buttons.
2. As the mobile computer initializes MC3000 demo window appears.
Files that remain open during a warm boot may not be retained.

Performing a Symbol MC3070 Cold Boot - Hard reset

A cold boot restarts the mobile computer and erases all user stored records and entries from RAM.
Never perform a cold boot unless a warm boot does not solve the problem. Cold boot resets the mobile computer, to the default settings.
All added applications and all stored data are removed. Do not cold boot without support desk approval.

To perform a cold boot:

1. Press and simultaneously hold the 1, 9 and Power keys. Do not hold down any other keys or buttons. As the mobile computer
initializes, the Symbol splash window appears for about a minute.

2. Calibrate the touch screen. See Calibration Screen to calibrate the mobile computer screen.

Symbol MC3090 Color hard reset

Resetting the Mobile Computer

If the mobile computer stops responding to input, reset it. There are two reset functions, warm boot and cold boot. A warm boot
restarts the mobile computer by closing all running programs. All data that is not saved is lost.

A cold boot also restarts the mobile computer, but erases all stored records and entries from RAM. In addition it returns formats,
preferences and other settings to the factory default settings.
Perform a warm boot first. If the mobile computer still does not respond, perform a cold boot.

Performing a Warm Boot - Soft reset

To perform a warm boot:

1. Press and simultaneously hold 7, 9 and Power. Do not hold down any other keys or buttons.
2. As the mobile computer initializes MC3000 demo window appears.
Files that remain open during a warm boot may not be retained.

Performing a Cold Boot - Hard reset

A cold boot restarts the mobile computer and erases all user stored records and entries from RAM. Never perform a cold boot unless
a warm boot does not solve the problem.
Cold boot resets the mobile computer, to the default settings. All added applications and all stored data are removed. Do not cold boot without support desk approval.

To perform a cold boot:

1. Press and simultaneously hold the 1, 9 and Power keys. Do not hold down any other keys or buttons. As the mobile computer
initializes, the Symbol splash window appears for about a minute.

2. Calibrate the touch screen. See Calibration Screen to calibrate the mobile computer screen.

Symbol MC50 NAV hard reset

Resetting the Symbol MC50 NAV Mobile Computer

Performing a Symbol MC50 NAV Soft Reset

A soft reset restarts the mobile computer and saves all stored records and entries.
Files that remain open during a soft reset may not be retained.
DO NOT perform a soft reset if the mobile computer is suspended. Press the power button to wake the mobile
computer.
To perform a soft reset, press the reset button on the back of the mobile computer with the stylus.

Performing a Hard Reset

Hold down the Power and right scan buttons, then press and release the reset button located below the battery release
on the back of the mobile computer. Release the Power and right scan buttons.
Do not hold down any key other than the Power and right scan buttons during a reset. Performing a hard reset
stores formats, preferences and other settings to the default settings.

Symbol MC50 NAV hard reset

Resetting the Symbol MC50 NAV Mobile Computer

Performing a Symbol MC50 NAV Soft Reset

A soft reset restarts the mobile computer and saves all stored records and entries.
Files that remain open during a soft reset may not be retained.
DO NOT perform a soft reset if the mobile computer is suspended. Press the power button to wake the mobile
computer.
To perform a soft reset, press the reset button on the back of the mobile computer with the stylus.

Performing a Hard Reset

Hold down the Power and right scan buttons, then press and release the reset button located below the battery release
on the back of the mobile computer. Release the Power and right scan buttons.
Do not hold down any key other than the Power and right scan buttons during a reset. Performing a hard reset
stores formats, preferences and other settings to the default settings.