Fujitsu-Siemens Pocket LOOX 610 BT hard reset

Resetting is required when an OS or application failure has occurred.
There are two types of resets:
• Normal reset
• Full reset

Pocket Loox 610 BT soft reset

Normal reset is equivalent to restarting a computer, and is required when a trouble has
occurred such as loss of response from the application.
Executing normal reset causes the current data to be discarded.
To execute normal reset, press the reset switch on the left-side of the device body with
the stylus pen, as shown in the figure below.

Important
When pressing the reset switch, be sure to use the accompanying stylus pen.
Using a ball-poin pen or the like may damage the device body.

Pocket Loox 610 BT hard reset full reset

Full reset is equivalent to recovery on a computer, and restores the state of this product
at the time of purchase. This operation is needed when problems such as inability to
start the OS occur.
Executing full reset causes the following data to be discarded:
• Current data
• Data you have created
• Applications you have added
To execute full reset, (1) hold down the power button, and (2) press the reset switch on
the left-side face of the device body with the stylus pen, as shown in the figure below