Eten Glofiish X500 hard reset

E-ten X500 Soft reset

Restarting the Pocket PC

Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen.
For your consideration, factoring into your safety and convenience, please refer to the following instructions in order:

1. Reset Press the 'Reset Button' of Pocket PC with the tip of the stylus.

E-ten X500 Hard reset

2. Default Settings procedures
If the touch screen is functional, please tap Programs, Utilities, and then Default Settings.

3. Clean Boot

Hold the 'Power Button' and press once on the 'Reset Button' with the tip of the stylus, and release both buttons simultaneously. Next,
continually hold the End Button until the system inquiry screen is displayed, then release the End Button. Answer the question(s).

Reset

Reset method: Press the 'Reset Button' of Pocket PC with the tip of the stylus.




Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen.
Result: In a moment, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This will retain the Microsoft Windows, factory pre-installed applications, user's input data, newly installed programs, and user custom settings.

Default Settings

Tap Programs, Utilities, and then Default Settings.



1. If this application is inadvertently
accessed, please select the to the upper right of the screen to exit, the system will not be affected.
2. If you are certain that you wish to perform this action, please select the data input block on the right, and enter the authorized code in the block to the left. Then tap the OK button.

Appropriate situation: If the Pocket PC is unable to maintain normal operation, but the touch screen is functional. Please refer to the instructions in this section to troubleshoot.
Result: This will retain only the Microsoft Windows, and factory pre-installed applications. Other settings such as user's input data, newly installed programs, and user custom settings will all be cleared.

E-ten X500 Clean Boot

Cold boot method: Hold the 'Power Button' of the Pocket PC with one hand while holding the stylus tip to push in the 'Reset Button' with the other. Simultaneously release both the 'Power Button' and 'Reset Button'.



Appropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no response, or if the screen is frozen.

Before executing the preceding 'Cold boot method', please carefully consider the following instructions and then decide on the cold boot method.
1. After a cold boot is performed, if no buttons are pressed, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This is identical to the reset result.
2. If a previous reset has already been attempted but the Pocket PC is still unable to maintain normal operation, consider the following solution:
After cold boot, hold the End Button on the bottom right of Pocket PC until the system inquiry screen is shown, and then release the End Button. Next, please read thoroughly through the instructions on cold booting before continuing carefully.

Perform cold boot and hold the End Button Please refer to the following instructions before careful consideration.



Erase all data and load default?
The default is 'No.' If Yes or No was not selected, after a few seconds the system will automatically execute the default No.

If you long press Left Soft-Key for a few seconds to select 'Yes,' then the system will erase all data and load default. After your Pocket PC restarts, follow the instructions on the screen to complete.

Caution!
1. After performing a cold boot, the system will retain Microsoft Windows and pre-installed programs. If you answer 'Yes' to the two questions displayed after a cold boot, other items such as the user's input data, newly installed programs and user settings will be lost.
2. There are two ways to retain your data, loaded default and registry:
Perform a Reset.
Performing a Cold Boot, and answer 'No' when the above question displays.