Eten DX900 hard reset

Eten DX900 Soft Reset

Reset method: Press the RESET button of Pocket PC with the tip of the stylus.

Result: In a moment, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This will retain the Microsoft Windows, factory pre-installed applications, and user's input data, newly installed programs, and user custom settings

Eten DX900 Default Settings procedures when touch screen is functoinal

If the Pocket PC is unable to maintain normal operation, but the touch screen is functional
Tap > Programs > Utilities > Default Settings
please select the data input block on the right, and enter the authorized code in the block to the left. Then tap OK.

Result: This will retain only the Microsoft Windows, and factory pre-installed applications. Other settings such as user's input data, newly
installed programs, and user custom settings will all be cleared.

Eten DX900 Hard reset

Eten DX900 Clean Boot

Press and hold both POWER button and RESETbutton for a while, then release them simultaneously. Wait for a few seconds until
the screen wakes up displaying the model name, firmware version and firmware builddate of your device, instantly press and
hold. Continue pressing and release it when you see an inquiry box shown on the screen.


Clean Boot

Eten DX900 Cold boot method:

Press and hold both POWER button and RESET button for a while, then release them simultaneously. Wait for a few seconds until the screen wakes up displaying the model name, firmware version and firmware build date of your device, instantly press and hold .

Appropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no
response, or if the screen is frozen.
Before executing the preceding 'Cold boot method', please carefully consider the following instructions and then decide on the cold boot
method.

1. After a cold boot is performed, if no buttons are pressed, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This is identical to the reset result.
2. If a previous reset has already been attempted but the Pocket PC is still unable to maintain normal operation, consider the following solution:

Press and hold both POWER button and RESET button for a while, then release them simultaneously.

Wait for a few seconds until the screen wakes up displaying the model name, firmware version and firmware build date of your device, instantly
press and hold . Continue pressing a and release it when you see this message shown on the screen.

The operation 'Erase all data and load default?' will delete all the data you stored on your device and restore it back to factory default settings.

If you press upon seeing the line 'Yes [press CAMERA button]' at the
bottom of screen, all the data you stored, programs you installed and
customized settings you made on this device will all be cleared. Follow the
onscreen instructions to complete the resetting after the device reboots.
Without your confirmation of this operation as pressing , the device
will cancel this procedure after a few seconds idle.


Caution
1. After performing a cold boot, the system will retain Microsoft Windows and
pre-installed programs. If you answer 'Yes' to the question displayed after a
cold boot, other items such as the user's input data, newly installed programs
and user settings will be lost.
2. There are two ways to retain your data, loaded default and registry:
1 Perform a Reset.
2. Performing a Cold Boot, and answer 'No' when the above question
displays.